Source-backed diagnostic reference

U059F Code: Meaning & Diagnostic Guide

Invalid Data Received From NOx Sensor B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U059F mean?

  • GENERIC: Invalid Data Received From NOx Sensor B Source
  • GENERIC: Invalid Data Received From NOx Sensor B Source

U059F quick answer

U059F is a generic diagnostic trouble code meaning “Invalid Data Received From NOx Sensor B.” It indicates that a vehicle control module received data it considers invalid; it does not by itself confirm that the sensor has failed.

Is U059F generic or manufacturer-specific?

U059F has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U059F works in the vehicle

U059F is a communication-related code. “Invalid data received” means the information reported for NOx Sensor B did not meet the receiving module’s expectations. The code alone does not identify the cause or specify which part needs replacement.

U059F symptoms

Depending on the vehicle and other faults, a warning light, emissions-related message, changed engine behavior, or no obvious symptom may occur. These are possibilities, not symptoms established by the code alone.

Possible causes of U059F

Possible causes include a NOx Sensor B or its wiring or connections, a communication or power issue, or a problem elsewhere in the system that supplies or interprets the data. Further testing is needed to identify the cause.

How to diagnose U059F

  1. Use a compatible scan tool to confirm U059F and record any other codes and available freeze-frame information before clearing anything.
  2. Consult vehicle-specific service information to identify NOx Sensor B and the modules and circuits associated with the code.
  3. Check for related codes and review relevant sensor data with suitable diagnostic equipment.
  4. With the vehicle made safe for inspection, visually check accessible sensor connectors and wiring for damage, looseness, or corrosion.
  5. Follow the vehicle-specific diagnostic procedure to test the relevant circuits and determine whether the fault is with a connection, wiring, sensor, or another system component.

How to fix U059F

Repair or replacement should follow the test results, not the code alone. Correct any confirmed wiring or connection issue, and replace a sensor or other component only when diagnosis supports it. A qualified technician can use vehicle-specific procedures to confirm the repair.

Can I drive with U059F?

U059F alone does not establish whether the vehicle is safe to drive. Check the owner’s manual and any dashboard warnings; seek prompt professional advice if there are severe drivability problems or other urgent warnings. Avoid delaying diagnosis if an emissions warning remains on.

U059F frequently asked questions

Does U059F mean NOx Sensor B has failed?

No. It means invalid data was received from the signal associated with NOx Sensor B. The sensor may be involved, but wiring, connections, or another system issue may also be responsible.

What does “invalid data received” mean?

A control module received information that did not match its expected format or range. The code does not identify why the information was invalid.

Can I clear U059F and assume the problem is fixed?

Clearing the code does not repair the cause. Record the available diagnostic information first, then check whether the code returns after appropriate testing.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.