Source-backed diagnostic reference

U0602 Code: Meaning & Diagnostic Guide

Lost Communication With Particulate Filter Pressure Sensor B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0602 mean?

  • GENERIC: Lost Communication With Particulate Filter Pressure Sensor B Source
  • GENERIC: Lost Communication With Particulate Filter Pressure Sensor B Source

U0602 quick answer

U0602 means the vehicle has lost communication with Particulate Filter Pressure Sensor B. It identifies a communication problem, not proof that the sensor itself has failed.

Is U0602 generic or manufacturer-specific?

U0602 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0602 works in the vehicle

The code is a generic network communication diagnostic trouble code. The vehicle’s control system is not receiving expected data from the particulate filter pressure sensor identified as B. The sensor’s role and system layout can vary by vehicle.

U0602 symptoms

There may be no obvious symptoms. Depending on the vehicle, a warning light, reduced performance, or an emissions-system warning may occur; these symptoms do not confirm the cause.

Possible causes of U0602

Possible causes include a problem with the sensor, its electrical connection or wiring, its power or ground supply, or communication elsewhere in the system. Further diagnosis is needed to identify the cause.

How to diagnose U0602

  1. Check for other stored trouble codes and note when the warning or symptoms occur.
  2. Use vehicle-specific service information to identify Sensor B and the relevant circuit.
  3. Have the sensor connector and accessible wiring inspected for loose connections, damage, or corrosion.
  4. Check the circuit and sensor operation using the vehicle’s diagnostic procedure and suitable test equipment.
  5. After any confirmed repair, clear the code and verify whether it returns.

How to fix U0602

Repair should be based on test results; replacing the sensor without diagnosis may not resolve a communication fault. Consult a qualified technician if the cause is unclear, and follow vehicle-specific procedures.

Can I drive with U0602?

Driving impact depends on the vehicle and any accompanying symptoms or warnings. Check the owner’s manual and arrange diagnosis. If the vehicle runs poorly or displays a serious warning, stop when safe and seek professional assistance.

U0602 frequently asked questions

Does U0602 mean Particulate Filter Pressure Sensor B is defective?

No. It means communication with the sensor has been lost. The sensor may be involved, but wiring, connections, or other communication issues may also be responsible.

Can I keep driving with U0602?

The code alone does not establish whether driving is safe. Consider the vehicle’s warnings and behavior, consult the owner’s manual, and have the issue diagnosed.

Should I replace the sensor to clear U0602?

Not without testing. Confirm the cause using vehicle-specific diagnostic information before replacing parts.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.