Source-backed diagnostic reference

U0607 Code: Meaning & Diagnostic Guide

Lost Communication With Throttle/Pedal Position Sensor/Switch B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0607 mean?

  • GENERIC: Lost Communication With Throttle/Pedal Position Sensor/Switch B Source
  • GENERIC: Lost Communication With Throttle/Pedal Position Sensor/Switch B Source

U0607 quick answer

U0607 means “Lost Communication With Throttle/Pedal Position Sensor/Switch B.” It indicates that a vehicle control module has detected a loss of communication involving that sensor or switch, but the code alone does not confirm which part has failed.

Is U0607 generic or manufacturer-specific?

U0607 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0607 works in the vehicle

U0607 is a generic network communication diagnostic trouble code. “Lost communication” means a module did not receive expected information; “B” identifies the sensor or signal path named by the code, not necessarily a confirmed faulty component. The exact diagnostic procedure can vary by vehicle.

U0607 symptoms

Possible symptoms include a warning light, reduced engine power, or unusual throttle response. A vehicle may also show no obvious symptoms. These effects are not confirmed by the code alone.

Possible causes of U0607

Possible causes include an intermittent electrical connection, damaged wiring, a power or ground issue, a communication network problem, or a fault in a related sensor or control module. Further testing is needed to identify the cause.

How to diagnose U0607

  1. Record U0607 and any other stored codes before clearing anything.
  2. Use a compatible scan tool to check which modules report the code and review available freeze-frame or event data.
  3. Consult vehicle-specific service information for the correct circuit and diagnostic procedure.
  4. Have the related wiring and connectors checked for looseness, corrosion, or damage.
  5. Test relevant power, ground, and communication circuits using the vehicle-specific procedure.
  6. Clear codes only after recording the results, then check whether U0607 returns.

How to fix U0607

Do not replace a sensor or module based on U0607 alone. Repair or replacement should follow test results and vehicle-specific service information; a qualified technician can diagnose intermittent communication faults.

Can I drive with U0607?

If throttle response is abnormal, engine power is reduced, or a warning indicates limited operation, stop somewhere safe and arrange professional help; towing may be appropriate. If there are no symptoms, the code still warrants prompt diagnosis, since safe operation cannot be determined from the code alone.

U0607 frequently asked questions

Does U0607 prove the throttle or pedal sensor has failed?

No. It reports lost communication involving Throttle/Pedal Position Sensor/Switch B, but does not identify a confirmed failed part.

Can U0607 affect how the vehicle drives?

It may be associated with reduced power or unusual throttle response, but symptoms vary and are not established by the code alone.

Can I clear U0607 and keep driving?

Clearing the code does not diagnose or repair its cause. If throttle behavior is abnormal, stop safely and seek professional assistance; otherwise, arrange diagnosis promptly.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.