Source-backed diagnostic reference

U060A Code: Meaning & Diagnostic Guide

Lost Communication With Manifold Absolute Pressure Sensor B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U060A mean?

  • GENERIC: Lost Communication With Manifold Absolute Pressure Sensor B Source
  • GENERIC: Lost Communication With Manifold Absolute Pressure Sensor B Source

U060A quick answer

U060A is a generic diagnostic trouble code meaning “Lost Communication With Manifold Absolute Pressure Sensor B.” It indicates that a vehicle control module did not receive expected communication from that sensor; it does not by itself confirm the sensor has failed.

Is U060A generic or manufacturer-specific?

U060A has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U060A works in the vehicle

U060A is a network communication code. “Manifold Absolute Pressure” (MAP) describes a sensor that measures pressure in the engine intake manifold. “Sensor B” identifies a designated sensor or circuit, but its exact location and role can vary by vehicle. The code alone does not identify the root cause.

U060A symptoms

Depending on the vehicle and whether other faults are present, possible signs include a warning light, reduced engine performance, rough running, or no noticeable symptoms. These symptoms are not specific to U060A.

Possible causes of U060A

Possible causes include an issue with the sensor, its wiring or connector, a power or ground supply, or vehicle network communication. Other related faults or vehicle-specific conditions may also be involved; the code alone does not establish which cause applies.

How to diagnose U060A

  1. Confirm U060A with a suitable scan tool and record any other stored codes and available freeze-frame information.
  2. Check service information for the specific vehicle to identify which device or circuit is designated as MAP sensor B.
  3. Have a qualified technician check relevant connectors, wiring, power, and ground using vehicle-specific procedures.
  4. Use scan-tool data and test results to distinguish a communication or circuit problem from a sensor fault before replacing parts.

How to fix U060A

The appropriate repair depends on diagnosis. A technician may need to address a connector, wiring, power or ground issue, communication fault, or a confirmed sensor problem. Follow vehicle-specific service information and avoid replacing the sensor based on U060A alone.

Can I drive with U060A?

U060A alone does not establish whether a vehicle is safe to drive. Consider the vehicle’s behavior and warning lights, and consult a qualified technician. If performance is severely affected or a serious warning appears, stop in a safe place and seek assistance.

U060A frequently asked questions

What does U060A mean?

It means communication was lost with Manifold Absolute Pressure Sensor B, according to the generic definition.

Does U060A prove the MAP sensor is bad?

No. The code reports a communication problem and does not confirm a failed sensor.

Can I diagnose U060A without vehicle-specific information?

A scan tool can confirm the code, but identifying Sensor B and testing its circuit require information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.