Source-backed diagnostic reference

U060D Code: Meaning & Diagnostic Guide

Lost Communication With Turbocharger/Supercharger Boost Sensor C

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U060D mean?

  • GENERIC: Lost Communication With Turbocharger/Supercharger Boost Sensor C Source
  • GENERIC: Lost Communication With Turbocharger/Supercharger Boost Sensor C Source

U060D quick answer

U060D is a generic diagnostic trouble code meaning “Lost Communication With Turbocharger/Supercharger Boost Sensor C.” It indicates a communication problem, but does not by itself confirm that the sensor has failed.

Is U060D generic or manufacturer-specific?

U060D has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U060D works in the vehicle

The U prefix identifies a network or communication-related code. In plain language, a vehicle control module reports that it is not receiving expected communication from the boost sensor identified as “C.” The exact sensor location and system details can vary by vehicle.

U060D symptoms

Depending on the vehicle and whether other faults are present, possible signs may include a warning light, reduced engine performance, or no noticeable symptoms. The code alone does not establish which symptoms will occur.

Possible causes of U060D

Possible explanations include a problem with the sensor, its wiring or connector, the communication network, or another related system. Vehicle-specific information and further testing are needed to narrow down the cause.

How to diagnose U060D

  1. Record all diagnostic codes and note whether U060D is current, pending, or stored.
  2. Use vehicle-specific service information to identify the boost sensor labeled “C” and the modules involved.
  3. Check for related codes that may help locate a shared wiring, power, ground, or communication issue.
  4. If safe and accessible, inspect relevant wiring and connectors for visible damage, looseness, or corrosion.
  5. Have the fault tested with suitable diagnostic equipment before replacing a sensor or other component.

How to fix U060D

Address the cause confirmed by testing; U060D alone does not prove that the boost sensor needs replacement. Follow service information for the specific vehicle. Do not attempt high-voltage repairs.

Can I drive with U060D?

The code alone cannot determine whether the vehicle is safe to drive. If there is reduced power, unusual operation, or a warning indicating a serious fault, stop when safe and seek professional advice. Otherwise, arrange diagnosis promptly and follow the vehicle’s warning messages.

U060D frequently asked questions

Does U060D mean the boost sensor has failed?

No. It reports lost communication with the sensor identified as “C,” but the sensor itself is only one possible cause.

What does “sensor C” mean?

It is a label used in the code definition. Its location and exact identity depend on the vehicle’s design and service information.

Can I diagnose U060D from the code alone?

No. Check related codes and vehicle-specific information, then test the relevant circuit and communication path.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.