Source-backed diagnostic reference

U060E Code: Meaning & Diagnostic Guide

Lost Communication With Crankcase Pressure Sensor

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U060E mean?

  • GENERIC: Lost Communication With Crankcase Pressure Sensor Source
  • GENERIC: Lost Communication With Crankcase Pressure Sensor Source

U060E quick answer

U060E is a generic diagnostic trouble code meaning communication with the crankcase pressure sensor has been lost.

Is U060E generic or manufacturer-specific?

U060E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U060E works in the vehicle

The code indicates that a vehicle control module is not receiving expected communication from the crankcase pressure sensor. It identifies a communication problem, not a confirmed failed sensor or other specific component. Vehicle-specific service information is needed to interpret it further.

U060E symptoms

Depending on the vehicle and the underlying cause, there may be a warning light, other communication codes, or no obvious symptoms. The code alone does not establish what the driver will notice.

Possible causes of U060E

Possible causes include a sensor or circuit problem, damaged or poorly connected wiring, a power or ground issue, or a communication fault. These are possibilities to investigate, not confirmed causes.

How to diagnose U060E

  1. Confirm U060E with a suitable scan tool and note any other stored codes and available vehicle symptoms.
  2. Consult service information for the specific vehicle to identify the relevant sensor circuit and diagnostic procedure.
  3. Have a qualified technician inspect accessible wiring and connectors for looseness, corrosion, or damage.
  4. Test the circuit and communication signals against vehicle-specific specifications before replacing parts.
  5. After any confirmed fault is repaired, clear the code and recheck whether it returns.

How to fix U060E

Repair should address the cause confirmed by diagnosis. Depending on test results, this may involve a connection, wiring, circuit, sensor, or another communication-related issue. Do not assume the sensor itself has failed based on U060E alone.

Can I drive with U060E?

The code alone does not determine whether driving is safe. Check the vehicle’s warnings and behavior, and arrange diagnosis. If it runs poorly, displays serious warnings, or develops other concerning symptoms, stop when safe and seek professional assistance.

U060E frequently asked questions

What does U060E mean?

It generically means communication with the crankcase pressure sensor has been lost.

Does U060E prove the crankcase pressure sensor is faulty?

No. The code reports lost communication; diagnosis is needed to identify whether the cause is the sensor, its circuit, wiring, or another issue.

Can I keep driving with U060E?

The code alone cannot determine that. Consider the vehicle’s behavior and warnings, and have it diagnosed; stop when safe if serious symptoms occur.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.