Source-backed diagnostic reference

U0613 Code: Meaning & Diagnostic Guide

Lost Communication With Intake Air Temperature Sensor 2 Bank 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0613 mean?

  • GENERIC: Lost Communication With Intake Air Temperature Sensor 2 Bank 1 Source
  • GENERIC: Lost Communication With Intake Air Temperature Sensor 2 Bank 1 Source

U0613 quick answer

U0613 means a vehicle control module has reported lost communication with Intake Air Temperature Sensor 2, Bank 1. The code alone does not confirm that the sensor has failed.

Is U0613 generic or manufacturer-specific?

U0613 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0613 works in the vehicle

U0613 is a generic communication-related diagnostic trouble code. “Lost communication” means a module did not receive expected information from the named sensor. The precise system design and diagnostic procedure can vary by vehicle.

U0613 symptoms

Depending on the vehicle and the fault, there may be a warning light, other stored codes, or changes in engine performance. Some vehicles may show no obvious symptoms.

Possible causes of U0613

Possible causes include a sensor or connector problem, damaged wiring, a power or ground issue, or a communication fault. These are possibilities, not confirmed causes of U0613.

How to diagnose U0613

  1. Record U0613 and any other codes before clearing anything; note whether each code is current or stored.
  2. Use vehicle-specific service information to identify the sensor, circuit, and appropriate diagnostic procedure.
  3. With the vehicle safely off, check accessible connectors and wiring for looseness, corrosion, or visible damage.
  4. Have the sensor circuit and communication signals tested using the specified procedure and suitable equipment.
  5. Confirm the cause with test results before replacing a sensor or other component.

How to fix U0613

Repair or replace only the part or wiring confirmed to be faulty, following vehicle-specific service information. Clearing the code without addressing its cause may not prevent it from returning.

Can I drive with U0613?

U0613 alone does not establish whether the vehicle is safe to drive. Follow any dashboard warnings and watch for drivability changes; if performance is significantly affected or the vehicle behaves unsafely, stop in a safe place and seek qualified assistance.

U0613 frequently asked questions

Does U0613 mean Intake Air Temperature Sensor 2 has failed?

No. It reports lost communication with the named sensor, but the cause could be the sensor, its circuit, or another communication-related issue.

Can U0613 be diagnosed the same way on every vehicle?

No. The code is generic, but the sensor location, circuit design, and test procedure can vary. Use service information for the specific vehicle.

Should I replace the sensor immediately?

Not based on the code alone. Check the relevant wiring and circuit and confirm the fault before replacing parts.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.