Source-backed diagnostic reference

U0614 Code: Meaning & Diagnostic Guide

Lost Communication With Intake Air Temperature Sensor 2 Bank 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0614 mean?

  • GENERIC: Lost Communication With Intake Air Temperature Sensor 2 Bank 2 Source
  • GENERIC: Lost Communication With Intake Air Temperature Sensor 2 Bank 2 Source

U0614 quick answer

U0614 is a generic communication code indicating that the vehicle has lost communication with Intake Air Temperature Sensor 2 on Bank 2. The code alone does not identify the underlying cause or confirm that the sensor has failed.

Is U0614 generic or manufacturer-specific?

U0614 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0614 works in the vehicle

“Lost communication” means the vehicle’s control system is not receiving expected information from the named sensor or its communication circuit. “Bank 2” refers to one side of an engine with two cylinder banks; the exact sensor location and system design vary by vehicle.

U0614 symptoms

Possible signs include a warning light, a stored or pending code, or changes in engine performance. Some vehicles may show no obvious symptoms. These effects are not confirmed by the code alone.

Possible causes of U0614

Possibilities include a loose or damaged connector, wiring or circuit trouble, a sensor issue, or a problem elsewhere in the control or communication system. Vehicle-specific diagnostic information is needed to narrow this down.

How to diagnose U0614

  1. Confirm the code with a scan tool and record any other codes and available freeze-frame information.
  2. Check the vehicle’s service information to identify the correct sensor, its location, and the circuit checks for that model.
  3. Inspect the relevant connector and accessible wiring for looseness, corrosion, damage, or signs of repair.
  4. Have a qualified technician test the circuit and sensor using the vehicle-specific procedure before replacing parts.
  5. Clear the code only after diagnosis or repair, then recheck whether it returns.

How to fix U0614

Base repairs on test results rather than replacing the sensor based on U0614 alone. Correct any verified connector or wiring issue, or replace a component only if vehicle-specific testing confirms it is faulty.

Can I drive with U0614?

The code alone does not establish whether the vehicle is safe to drive. If there are drivability problems or other warning signs, arrange prompt professional assessment; otherwise, consult the vehicle’s manual or a qualified technician about continued use.

U0614 frequently asked questions

Does U0614 mean the intake air temperature sensor has failed?

No. It indicates lost communication with the named sensor, but the cause could be the sensor, its wiring or connector, or another part of the system.

Where is Intake Air Temperature Sensor 2 Bank 2?

Its location depends on the vehicle and engine. Use the vehicle’s service information to identify it.

Can I diagnose U0614 by replacing the sensor?

Replacing parts without testing may not resolve the code. First confirm the code and check the relevant circuit using vehicle-specific diagnostic procedures.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.