U061A Code: Meaning & Diagnostic Guide
Lost Communication With Reductant Level Sensor B
What does U061A mean?
U061A quick answer
U061A means “Lost Communication With Reductant Level Sensor B.” It indicates that a vehicle control module is not receiving expected communication from that sensor; it does not, by itself, confirm a failed sensor.
Is U061A generic or manufacturer-specific?
U061A has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How U061A works in the vehicle
U061A is a generic network communication diagnostic trouble code. “Lost communication” means expected data was not received, and “reductant” refers to the emissions-fluid system on vehicles equipped with one. The exact meaning of “Sensor B” and the diagnostic procedure can vary by vehicle.
U061A symptoms
Depending on the vehicle and whether other faults are present, there may be a warning light or emissions-system message. Some vehicles may show no obvious change in how they run.
Possible causes of U061A
Possible explanations include an intermittent electrical connection, wiring or network communication issue, a power or ground problem, or a sensor fault. The code alone does not identify which, if any, is responsible.
How to diagnose U061A
- Record U061A and any other stored codes and note when the warning appeared.
- Check the vehicle-specific service information to confirm what “Reductant Level Sensor B” refers to and how the code is diagnosed.
- With the vehicle safely powered down, visually check accessible related wiring and connectors for looseness or visible damage; do not probe high-voltage components.
- Have a qualified technician test the relevant power, ground, wiring, and communication circuits before replacing parts.
- After repairs, clear the code using an appropriate scan tool and verify whether it returns.
How to fix U061A
Repair depends on test results. A connection or wiring issue may need attention, while a sensor or other circuit component should be replaced only if diagnosis confirms it. Follow vehicle-specific service information or consult a qualified technician.
Can I drive with U061A?
The code alone cannot establish whether the vehicle is safe to drive. Check for warning messages and changes in operation, and consult the owner’s manual or a qualified technician. If a warning indicates a serious fault or the vehicle behaves abnormally, stop in a safe place and seek assistance.
U061A frequently asked questions
Does U061A mean the reductant level sensor has failed?
No. It reports lost communication with the sensor, but the cause could be elsewhere in the electrical or communication circuit.
Can I diagnose U061A without vehicle-specific information?
Only to a limited extent. The meaning of Sensor B and the correct circuit checks can vary by vehicle, so consult its service information.
Should I replace the sensor as a first step?
Not based on the code alone. Have the related connections and circuits checked before deciding whether a part needs replacement.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.