U064B Code: Meaning & Diagnostic Guide
Lost Communication With Hybrid/EV Battery Pack Current Sensor B
What does U064B mean?
U064B quick answer
U064B is a generic communication code meaning that a vehicle’s control system has lost communication with Hybrid/EV Battery Pack Current Sensor B. It does not, by itself, confirm that the sensor has failed.
Is U064B generic or manufacturer-specific?
U064B has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How U064B works in the vehicle
U064B is a network communication diagnostic trouble code. “Lost communication” means a control module did not receive expected messages from the named sensor or its associated circuit. The code’s exact interpretation and diagnostic procedure can vary by vehicle.
U064B symptoms
Depending on the vehicle and the cause, there may be a hybrid or EV warning, a check-engine light, or changes in vehicle operation. Some vehicles may show no noticeable symptoms. These signs are not specific to U064B.
Possible causes of U064B
Possible explanations include a temporary communication interruption, a wiring or connector issue, a power or ground problem, a network fault, or a problem with the sensor or a related control module. The code alone does not identify which, if any, of these is responsible.
How to diagnose U064B
- Use a scan tool to check all vehicle modules for current, pending, and history codes.
- Record code status and available freeze-frame data before clearing codes.
- Check the vehicle’s service information for the exact U064B definition and diagnostic procedure.
- Have a qualified technician inspect relevant power, ground, wiring, connectors, and network communication.
- Do not probe or repair high-voltage components; use a technician qualified to work on hybrid or EV systems.
How to fix U064B
The correct repair depends on the cause found during diagnosis. Do not replace the current sensor based on U064B alone. A qualified technician should confirm the vehicle-specific procedure and address any verified wiring, power, network, sensor, or module fault.
Can I drive with U064B?
U064B alone cannot establish whether a vehicle is safe to drive. Follow any dashboard warnings and the owner’s manual. If the vehicle shows a hybrid/EV system warning, operates abnormally, or loses power, stop when safe and arrange professional assessment.
U064B frequently asked questions
What does code U064B mean?
It means communication was lost with Hybrid/EV Battery Pack Current Sensor B, according to the generic definition. It does not prove the sensor itself is defective.
Can U064B identify the exact failed part?
No. It identifies a communication problem, and further vehicle-specific diagnosis is needed to find the cause.
Can I drive with U064B?
The code alone does not determine drivability. Consider the vehicle’s warnings and behavior, consult the owner’s manual, and seek professional advice if a hybrid/EV warning or abnormal operation occurs.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.