Source-backed diagnostic reference

U064F Code: Meaning & Diagnostic Guide

Lost Communication With Intake Manifold Runner Position Sensor Bank 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U064F mean?

  • GENERIC: Lost Communication With Intake Manifold Runner Position Sensor Bank 1 Source
  • GENERIC: Lost Communication With Intake Manifold Runner Position Sensor Bank 1 Source

U064F quick answer

U064F is a generic diagnostic trouble code meaning “Lost Communication With Intake Manifold Runner Position Sensor Bank 1.” It indicates that a vehicle controller is not receiving expected communication from that sensor; the code alone does not identify the failed part.

Is U064F generic or manufacturer-specific?

U064F has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U064F works in the vehicle

“Lost communication” means the expected electronic message or signal was not received. “Bank 1” refers to the engine bank that includes cylinder 1, where applicable. The exact system design and diagnostic meaning can vary by vehicle.

U064F symptoms

A warning light or changes in engine performance may occur, but symptoms vary. The code may also be stored without an obvious symptom.

Possible causes of U064F

Possible explanations include a sensor or circuit issue, a loose or damaged connector or wiring, a power or ground problem, or a communication or control-module issue. U064F alone does not confirm any of these causes.

How to diagnose U064F

  1. Check the vehicle-specific service information to confirm how U064F is defined and which components are involved.
  2. Read all stored and pending codes, along with available freeze-frame data, before clearing anything.
  3. Inspect relevant connectors and wiring for looseness, corrosion, damage, or signs of prior repair.
  4. Use the service procedure and suitable diagnostic equipment to check circuit signals and communication; do not replace a component based on this code alone.
  5. After any confirmed repair, clear the codes if appropriate and verify whether the code returns under the specified test conditions.

How to fix U064F

Repair should follow the vehicle-specific diagnosis. Address only the fault confirmed by testing, such as a verified wiring, connector, circuit, or component issue. Seek help from a qualified technician if the cause is unclear.

Can I drive with U064F?

The code alone does not establish whether the vehicle is safe to drive. Follow any warning messages and the vehicle manual. If the engine runs poorly, loses power, or shows other serious symptoms, stop when safe and arrange professional assessment.

U064F frequently asked questions

Does U064F prove the intake manifold runner position sensor has failed?

No. It indicates lost communication, not a confirmed failed sensor. Wiring, connectors, power, ground, or communication issues may also need investigation.

Can U064F affect engine performance?

It may be associated with performance changes, but symptoms vary by vehicle and the code alone does not establish that the engine will run poorly.

Can I clear U064F without diagnosing it?

Clearing the code does not fix its cause. Record the code and related data, diagnose the issue using vehicle-specific information, and check whether it returns after any repair.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.