Source-backed diagnostic reference

U0665 Code: Meaning & Diagnostic Guide

Lost Communication With Fuel Rail Pressure Sensor Bank 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0665 mean?

  • GENERIC: Lost Communication With Fuel Rail Pressure Sensor Bank 2 Source
  • GENERIC: Lost Communication With Fuel Rail Pressure Sensor Bank 2 Source

U0665 quick answer

U0665 is a generic diagnostic trouble code meaning “Lost Communication With Fuel Rail Pressure Sensor Bank 2.” It indicates that a vehicle control system did not receive expected communication; it does not, by itself, confirm which part has failed.

Is U0665 generic or manufacturer-specific?

U0665 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0665 works in the vehicle

U0665 is a network communication code. “Bank 2” generally refers to the engine bank opposite Bank 1, but the sensor setup and code interpretation can vary by vehicle. Check vehicle-specific service information before diagnosing.

U0665 symptoms

Possible symptoms may include a warning light, poor running, reduced performance, or difficulty starting. A vehicle may also show no obvious symptoms. The code alone does not establish that any of these are present.

Possible causes of U0665

Possible explanations include an intermittent electrical connection, damaged wiring, a power or ground issue, a communication-network problem, or a fault involving the sensor or another control component. These are possibilities, not confirmed causes.

How to diagnose U0665

  1. Record all stored codes and relevant freeze-frame data before clearing anything.
  2. Use service information for the specific vehicle to identify the sensor, circuit, and diagnostic procedure associated with U0665.
  3. With the vehicle safely powered down as directed by its service information, visually check accessible wiring and connectors for damage, looseness, corrosion, or moisture.
  4. Have a qualified technician test the specified power, ground, and communication circuits using the vehicle’s diagnostic procedure.
  5. Repair only the fault confirmed by testing, then clear the code and verify whether it returns.

How to fix U0665

The appropriate repair depends on test results. Do not replace the fuel rail pressure sensor or another component based on U0665 alone. If diagnosis involves circuits or systems you are not equipped to test, consult a qualified automotive technician.

Can I drive with U0665?

The code alone cannot determine whether the vehicle is safe to drive. If the engine runs poorly, stalls, loses power, or displays other serious warnings, stop when safe and seek assistance. Otherwise, arrange diagnosis promptly and follow the vehicle’s owner’s manual.

U0665 frequently asked questions

Does U0665 prove the fuel rail pressure sensor has failed?

No. It indicates lost communication with the identified sensor; testing is needed to find the cause.

Can I drive with U0665?

The code alone does not establish drivability or safety. Consider how the vehicle behaves, follow the owner’s manual, and get the code diagnosed.

What does Bank 2 mean?

On many engines, Bank 2 is the bank opposite Bank 1. The vehicle’s service information is needed to identify the relevant sensor and circuit.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.