Source-backed diagnostic reference

U067A Code: Meaning & Diagnostic Guide

Lost Communication With Transmission Fluid Pressure Sensor/Switch B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U067A mean?

  • GENERIC: Lost Communication With Transmission Fluid Pressure Sensor/Switch B Source
  • GENERIC: Lost Communication With Transmission Fluid Pressure Sensor/Switch B Source

U067A quick answer

U067A is a generic diagnostic trouble code meaning lost communication with transmission fluid pressure sensor/switch B. It identifies a communication problem, not a confirmed failed sensor.

Is U067A generic or manufacturer-specific?

U067A has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U067A works in the vehicle

The U prefix indicates a network communication code. For U067A, a vehicle control module reports that it is not receiving expected communication from transmission fluid pressure sensor/switch B. The exact system design and diagnostic procedure can vary by vehicle.

U067A symptoms

Depending on the vehicle and the cause, there may be a warning light, a transmission-related message, or changes in transmission operation. Some vehicles may show no obvious symptoms. These possibilities do not confirm a particular fault.

Possible causes of U067A

Possible causes include an intermittent connection, damaged wiring, a power or ground issue, a communication-network problem, or a fault involving the sensor or a control module. The code alone does not identify which, if any, is responsible.

How to diagnose U067A

  1. Record U067A and any other stored codes and note when the warning or symptoms occur.
  2. Check the vehicle-specific service information for the meaning of sensor/switch B and the recommended test procedure.
  3. Use a compatible scan tool to check which modules report the code and whether it returns after clearing and retesting, when appropriate.
  4. Inspect accessible related wiring and connectors for looseness, corrosion, or visible damage.
  5. Have a qualified technician test the relevant circuits and communication network before replacing parts.

How to fix U067A

The appropriate repair depends on the test results. A connection, wiring, power or ground, network, sensor, or module issue may need attention; do not replace the sensor based on U067A alone. Follow vehicle-specific service information or consult a qualified technician.

Can I drive with U067A?

U067A alone does not establish whether the vehicle is safe to drive. If transmission operation is abnormal, a warning indicates a serious problem, or the vehicle behaves unpredictably, stop driving when safe and arrange professional assessment. Otherwise, consult the vehicle manual or a technician for vehicle-specific advice.

U067A frequently asked questions

What does U067A mean?

It means lost communication with transmission fluid pressure sensor/switch B. It does not, by itself, prove that the sensor has failed.

Does U067A always mean the transmission pressure sensor needs replacement?

No. Wiring, connections, power or ground, network communication, or other issues may be involved. Diagnosis is needed before replacing parts.

Can I drive with U067A?

The code alone cannot determine that. Consider the vehicle's symptoms and warnings, and seek vehicle-specific guidance; abnormal transmission behavior warrants prompt assessment.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.