Source-backed diagnostic reference

U067B Code: Meaning & Diagnostic Guide

Lost Communication With Engine Disconnect Clutch Pressure Sensor

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U067B mean?

  • GENERIC: Lost Communication With Engine Disconnect Clutch Pressure Sensor Source
  • GENERIC: Lost Communication With Engine Disconnect Clutch Pressure Sensor Source

U067B quick answer

U067B is a generic communication code meaning that a control module has lost communication with the engine disconnect clutch pressure sensor.

Is U067B generic or manufacturer-specific?

U067B has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U067B works in the vehicle

“Lost communication” means a vehicle control module did not receive expected data from the sensor over the vehicle’s communication system. The code identifies a communication issue, but by itself does not confirm that the sensor has failed or identify the underlying cause.

U067B symptoms

There may be no noticeable symptoms. Depending on the vehicle and how its systems use this data, a warning light, stored fault message, or change in operation may occur.

Possible causes of U067B

Possible explanations include a temporary communication interruption, a wiring or connector issue, a power or ground problem, or a fault involving the sensor or a control module. The code alone does not establish which, if any, applies.

How to diagnose U067B

  1. Record U067B and any other stored codes before clearing anything.
  2. Check the vehicle-specific service information to confirm which module reported the code and how the sensor communication system is arranged.
  3. Look for related codes that may help distinguish a sensor communication issue from a broader network or power problem.
  4. Have wiring, connectors, power, and ground checked using the vehicle-specific diagnostic procedure.
  5. If the cause remains unclear, seek diagnosis from a qualified technician rather than replacing parts based only on this code.

How to fix U067B

The appropriate repair depends on the test results and vehicle-specific service information. Do not assume the sensor itself is defective; have any identified wiring, connection, power, ground, or component issue addressed by a qualified technician.

Can I drive with U067B?

U067B alone does not establish whether the vehicle is safe to drive. Check for warning messages or changes in operation and follow the vehicle’s manual. If operation seems abnormal or a warning advises stopping, stop in a safe place and arrange professional assistance.

U067B frequently asked questions

What does U067B mean?

It indicates lost communication with the engine disconnect clutch pressure sensor.

Does U067B prove the sensor has failed?

No. It reports a communication problem and does not, by itself, identify the failed part or root cause.

Can I diagnose U067B without vehicle-specific information?

The code definition is generic, but the relevant modules, wiring, and test procedures can vary. Use service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.