Source-backed diagnostic reference

U1047 Code: Meaning & Diagnostic Guide

SCP (J1850) Invalid or Missing Data for Primary Id

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U1047 mean?

  • OTHER: SCP (J1850) Invalid or Missing Data for Primary Id Source

U1047 quick answer

U1047 is a communication-network code indicating that a module detected invalid or missing data for a primary ID on the SCP (J1850) network. It does not, by itself, identify a failed part.

Is U1047 generic or manufacturer-specific?

U1047 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U1047 works in the vehicle

SCP (J1850) is a vehicle communication network. “Invalid or missing data” means a module did not receive information it expected, or received information it could not recognize. The code description alone does not identify which module or circuit is responsible.

U1047 symptoms

Depending on the vehicle and which information is affected, there may be warning lights, communication-related fault codes, or features that behave unexpectedly. There may also be no obvious symptoms. These are possibilities, not confirmed effects of U1047.

Possible causes of U1047

Possible explanations include a temporary communication interruption, a connection or wiring issue, low or unstable electrical power, or a module that is not communicating correctly. The supplied code information does not confirm any particular cause or failed component.

How to diagnose U1047

  1. Record all stored codes and available freeze-frame or scan-tool data before clearing anything.
  2. Use service information specific to the vehicle to identify which modules use the SCP (J1850) network and what the primary ID refers to.
  3. Check whether other modules report communication codes; their codes and status may help narrow the issue.
  4. Have a qualified technician inspect relevant power, ground, connectors, and network wiring using vehicle-specific procedures.
  5. After any verified issue is addressed, clear codes if appropriate and confirm whether U1047 returns.

How to fix U1047

The correct repair depends on the vehicle and test results. Avoid replacing a module based on U1047 alone; a qualified technician should confirm the source using vehicle-specific diagnostic information.

Can I drive with U1047?

The code description alone cannot determine whether the vehicle is safe to drive. If warning lights, loss of important functions, or unusual vehicle behavior occur, stop when safe and seek professional advice. Otherwise, arrange diagnosis and follow the vehicle’s manual.

U1047 frequently asked questions

Does U1047 identify a failed module?

No. It indicates invalid or missing SCP (J1850) data for a primary ID, but does not identify a failed part.

Can U1047 appear without noticeable symptoms?

Yes. The code information does not establish that symptoms will always be present.

Should I replace a component when U1047 appears?

Not based on the code alone. Diagnosis should use the vehicle’s service information and test results.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.