Source-backed diagnostic reference

U105400 Code: Meaning & Diagnostic Guide

Audi identifies U105400 as “Information electronics control module 1, no communication.” Its bulletin lists the code for these Q4 e-tron models and says the listed DTCs may be stored despite no vehicle problem; no repair is available or required under that bulletin. This verifies applicability to the listed EVs, not specifically to the Audi A4 in the keyword.

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U105400 mean?

  • Audi: Audi identifies U105400 as “Information electronics control module 1, no communication.” Its bulletin lists the code for these Q4 e-tron models and says the listed DTCs may be stored despite no vehicle problem; no repair is available or required under that bulletin. This verifies applicability to the listed EVs, not specifically to the Audi A4 in the keyword. Source
  • Volkswagen: Volkswagen’s bulletin lists U105400 as “Information electronics control module 1 No communication,” passive/sporadic, with symptom code 2244723 in the Data Bus OBD Interface. Its guidance to ignore the code applies only to the listed DTC/symptom-code combination and specified bulletin conditions; it does not establish that every U105400 occurrence is irrelevant. Source

U105400 quick answer

U105400 generally describes a loss of communication with information electronics control module 1. The code alone does not confirm that the module has failed or that a repair is needed.

Is U105400 generic or manufacturer-specific?

U105400 currently has manufacturer-labelled reference definitions for Audi, Volkswagen. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U105400 works in the vehicle

“No communication” means another vehicle system did not receive expected data from the named module. The code’s meaning and significance can depend on the vehicle and any accompanying symptom code or bulletin conditions. Manufacturer bulletins describe limited cases where U105400 may be stored without a vehicle problem; those conditions do not apply automatically to every occurrence.

U105400 symptoms

The supplied evidence does not establish specific symptoms for every U105400 occurrence. Depending on the vehicle and circumstances, there may be no noticeable issue, or related electronics may not behave as expected.

Possible causes of U105400

Possible explanations can include a temporary communication interruption, a vehicle-network or power-supply issue, or a module-related problem. The code by itself does not identify a failed component. In some specified bulletin cases, the code may be stored even when no vehicle problem is present.

How to diagnose U105400

  1. Scan all vehicle systems and record U105400, its status, any symptom codes, and other communication faults before clearing anything.
  2. Note whether the code is current or stored and whether any related functions or warning messages are affected.
  3. Check the vehicle-specific service information and bulletins for the exact model, year, and accompanying code details.
  4. Have a qualified technician assess relevant module power, connections, and vehicle-network communication using the manufacturer’s procedures.
  5. Confirm the result with a follow-up scan after any appropriate repair or verification.

How to fix U105400

Do not replace a module based on U105400 alone. The appropriate response may range from no repair in a narrowly applicable bulletin case to further diagnosis; confirm the vehicle-specific conditions first.

Can I drive with U105400?

The code alone does not establish whether a vehicle is safe to drive. Consider warning messages and affected functions, and consult a qualified technician if there are drivability concerns or important systems are unavailable.

U105400 frequently asked questions

Does U105400 mean the information electronics module has failed?

No. It reports a communication issue, not a confirmed component failure. Further vehicle-specific diagnosis is needed.

Can U105400 be stored when there is no vehicle problem?

Yes, manufacturer bulletins describe limited circumstances where it may be stored without a vehicle problem. Their guidance applies only to the specified vehicles and code conditions.

Should U105400 be cleared or ignored?

Do not assume it should be ignored. Record the scan details and check the applicable service information and bulletin conditions before deciding what to do.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.