Source-backed diagnostic reference

U1102 Code: Meaning & Diagnostic Guide

SCP (J1850) Invalid or Missing Data for Primary Id

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U1102 mean?

  • OTHER: SCP (J1850) Invalid or Missing Data for Primary Id Source

U1102 quick answer

U1102 is listed as “SCP (J1850) Invalid or Missing Data for Primary Id.” It indicates that expected data for a primary identifier was invalid or unavailable on an SCP/J1850 vehicle communication network; the code alone does not identify a failed part.

Is U1102 generic or manufacturer-specific?

U1102 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U1102 works in the vehicle

U1102 is a network communication diagnostic trouble code. SCP (J1850) refers to a vehicle communication protocol, and “primary ID” means an identifier used to distinguish a data source or message. The exact meaning and diagnostic procedure can vary by vehicle.

U1102 symptoms

Depending on the vehicle and the systems involved, a communication code like U1102 may appear with warning lights, other stored codes, or intermittent system behavior. It may also be present without an obvious symptom. These possibilities are not confirmed effects for every vehicle.

Possible causes of U1102

Possible areas to investigate include intermittent network communication, a connection or wiring issue, low system voltage, or a module that is not sending expected data. U1102 by itself does not confirm any of these causes or identify a failed component.

How to diagnose U1102

  1. Record the vehicle’s year, make, model, symptoms, and all stored codes before clearing anything.
  2. Use vehicle-specific service information to confirm how U1102 is defined and which modules and network procedures apply.
  3. Check battery and charging-system condition, and inspect accessible network connectors and wiring for visible damage or poor connections.
  4. Use a compatible scan tool to check which modules communicate and whether U1102 is current or stored; compare related codes and freeze-frame data if available.
  5. If the cause is unclear, have a qualified technician perform vehicle-specific network diagnostics.

How to fix U1102

Address the cause confirmed by testing rather than replacing a part based on U1102 alone. Repairs may involve correcting a verified power, connection, wiring, or communication issue. Follow vehicle-specific service procedures, and seek qualified help for network diagnosis.

Can I drive with U1102?

U1102 alone does not establish whether a vehicle is safe to drive. Consider the symptoms and any affected systems. If important functions are impaired, warning lights indicate a serious problem, or the vehicle behaves unpredictably, stop driving when safe and seek professional assistance.

U1102 frequently asked questions

What does U1102 mean?

U1102 is listed as invalid or missing data for a primary ID on an SCP (J1850) communication network.

Does U1102 identify a failed module?

No. The code describes a communication-data issue and does not, by itself, confirm which component—if any—has failed.

Can I diagnose U1102 the same way on every vehicle?

No. The definition and test procedure can vary by vehicle, so use service information for the specific year, make, and model.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.