Source-backed diagnostic reference

U1105 Code: Meaning & Diagnostic Guide

SCP (J1850) Invalid or Missing Data for Chassis Status Request

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U1105 mean?

  • OTHER: SCP (J1850) Invalid or Missing Data for Chassis Status Request Source

U1105 quick answer

U1105 indicates invalid or missing data for a chassis status request on the SCP (J1850) communication network. The code alone does not identify a failed part.

Is U1105 generic or manufacturer-specific?

U1105 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U1105 works in the vehicle

This is a network communication code. SCP (J1850) is a vehicle communication protocol; “invalid or missing data” means a message expected for a chassis status request was absent or not understood. The reference does not specify a manufacturer or vehicle application.

U1105 symptoms

Depending on the vehicle and which systems are affected, there may be warning lights, unusual chassis-related behavior, communication faults, or no noticeable symptoms. These are possibilities, not confirmed effects of this code.

Possible causes of U1105

Possible explanations include an intermittent network connection, damaged wiring or connectors, a power or ground issue, low system voltage, or a communication-module fault. U1105 by itself does not confirm any of these causes.

How to diagnose U1105

  1. Confirm the exact code and check whether it is current, pending, or stored.
  2. Scan all available modules and record related codes and vehicle symptoms before clearing anything.
  3. Check the vehicle battery and charging system, and inspect relevant accessible fuses and connectors for looseness, corrosion, or damage.
  4. Use vehicle-specific service information to identify the network and modules involved; have a qualified technician test the communication circuit if needed.

How to fix U1105

Address the cause established by testing rather than replacing parts based on U1105 alone. Wiring, power, ground, or module concerns may require vehicle-specific diagnosis by a qualified technician.

Can I drive with U1105?

The code alone does not determine whether driving is safe. If warning lights, handling changes, or other concerning symptoms occur, stop when safe and arrange an assessment. Otherwise, consult vehicle-specific guidance and have the code diagnosed.

U1105 frequently asked questions

What does U1105 mean?

It means invalid or missing data was reported for a chassis status request on the SCP (J1850) network.

Does U1105 identify a failed component?

No. It describes a communication-data problem and does not, by itself, identify which component or circuit is responsible.

Can I keep driving with U1105?

The code alone cannot answer that. Consider symptoms and vehicle-specific guidance, and seek prompt assessment if handling or other important functions seem affected.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.