Source-backed diagnostic reference

U111000 Code: Meaning & Diagnostic Guide

Audi’s bulletin defines U111000 as “Function restriction due to communication interruption.” It reports the code in the Information Electronics control unit (J794, address 005F), with symptom codes 6922 or 7178, in connection with intermittent driver-assistance issues.

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U111000 mean?

  • Audi: Audi’s bulletin defines U111000 as “Function restriction due to communication interruption.” It reports the code in the Information Electronics control unit (J794, address 005F), with symptom codes 6922 or 7178, in connection with intermittent driver-assistance issues. Source
  • Volkswagen: Volkswagen’s bulletin lists U111000 in the infotainment control unit as “restricted function because of communication problem,” passive/sporadic. It says the listed DTC/symptom combinations are irrelevant and have no effect on vehicle functions or electrical systems or cause customer concerns. The bulletin applies to 2021–2022 ID.4 vehicles, not specifically to Passat. Source

U111000 quick answer

U111000 generally describes a function restriction associated with a communication interruption. Its meaning and significance depend on the vehicle and the control modules reporting it; the code alone does not identify a failed part.

Is U111000 generic or manufacturer-specific?

U111000 currently has manufacturer-labelled reference definitions for Audi, Volkswagen. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U111000 works in the vehicle

In plain language, a vehicle module recorded that communication needed for a function was interrupted or unavailable. Manufacturer documents provide vehicle-specific context: an Audi bulletin describes the code in the Information Electronics control unit, while a Volkswagen bulletin lists it as passive/sporadic in the infotainment control unit for specified 2021–2022 ID.4 vehicles. These examples do not establish that the same module or effect applies to every vehicle.

U111000 symptoms

Some vehicles may show an intermittent infotainment or driver-assistance concern, depending on the vehicle and related fault information. The code can also be stored without an apparent customer concern; its presence alone does not prove a current malfunction.

Possible causes of U111000

U111000 indicates a recorded communication interruption or restriction, not its root cause. Possible explanations depend on vehicle-specific diagnostic data and may include a temporary communication issue. The evidence does not confirm a failed component or a universal cause.

How to diagnose U111000

  1. Confirm the vehicle’s make, model, year, and equipment, then check the manufacturer’s definition and applicability for that exact vehicle.
  2. Scan all relevant control modules and record the complete fault details, including status, symptom codes, and any related codes.
  3. Note whether the code is current or stored as intermittent, and compare it with any observed symptoms.
  4. Have a qualified technician follow the vehicle-specific diagnostic procedure before replacing parts or clearing codes.

How to fix U111000

The appropriate repair depends on the vehicle-specific findings. Do not replace a control module based on U111000 alone. Ask a qualified technician to verify the communication issue and consult applicable service information for the exact vehicle.

Can I drive with U111000?

The code alone cannot determine whether a vehicle is safe to drive. Consider any warning messages or loss of function, especially for driver-assistance features. If a safety-related function is unavailable or the vehicle behaves abnormally, avoid relying on that function and seek professional advice promptly.

U111000 frequently asked questions

What does U111000 mean?

It describes a function restriction associated with a communication interruption. The specific meaning depends on the vehicle and its control-module data.

Does U111000 identify a failed part?

No. It records a communication-related condition and does not, by itself, confirm which component caused it.

Can U111000 appear without noticeable symptoms?

Yes. One manufacturer bulletin describes the code as passive or sporadic and reports no customer concern for the specific vehicles covered. That does not establish the same result for every vehicle.

How should U111000 be diagnosed?

Check the complete scan results, including related codes and status, and use diagnostic information for the exact make, model, and year.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.