Source-backed diagnostic reference

U111200 Code: Meaning & Diagnostic Guide

Audi’s DTC list defines U111200 as “Function limitation due to implausible message.” The source does not identify an A6 model year or establish applicability to a 2021+ BEV/PHEV.

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U111200 mean?

  • GENERIC: Audi’s DTC list defines U111200 as “Function limitation due to implausible message.” The source does not identify an A6 model year or establish applicability to a 2021+ BEV/PHEV. Source

U111200 quick answer

U111200 means “Function limitation due to implausible message.” A control module has received a message it considers unreliable, but this code alone does not identify the source or prove that a particular part has failed.

Is U111200 generic or manufacturer-specific?

U111200 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U111200 works in the vehicle

The reference defines U111200 as a diagnostic trouble code (DTC) for a function being limited because of an implausible message. In plain language, a vehicle system received information that did not seem valid. The code description does not establish which module sent the message or which vehicle models it applies to.

U111200 symptoms

Depending on the vehicle and affected system, there may be a warning light, a displayed message, or a temporarily limited feature. The code alone does not confirm that any of these symptoms are present.

Possible causes of U111200

Possible explanations may include inconsistent information between control modules, a communication or power-supply issue, or a temporary fault. U111200 by itself does not confirm a failed component or a specific cause.

How to diagnose U111200

  1. Record all stored and pending codes before clearing anything.
  2. Use a compatible scan tool to identify which module reported U111200 and review available freeze-frame or event data.
  3. Check for related codes in other modules and note when the fault occurred.
  4. Have a qualified technician check relevant wiring, connectors, power, and grounds using vehicle-specific service information.
  5. Clear the code only after recording the diagnostic information, then check whether it returns.

How to fix U111200

The appropriate repair depends on which module reported the code and what related test results show. Avoid replacing parts based on U111200 alone. For hybrid or electric vehicles, leave high-voltage system inspection and repair to qualified personnel.

Can I drive with U111200?

The code alone cannot determine whether a vehicle is safe to drive. Follow any vehicle warnings and consult a qualified technician, especially if a critical function is limited, handling changes, or additional warning lights appear.

U111200 frequently asked questions

What does U111200 mean?

It means “Function limitation due to implausible message”: a control module considered received information unreliable.

Does U111200 identify a failed part?

No. The code description does not name a failed component or establish the underlying cause.

Does this code apply to every vehicle or model year?

No applicability to a specific model year or vehicle type is established by the supplied reference. Check vehicle-specific service information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.