Source-backed diagnostic reference

U1248 Code: Meaning & Diagnostic Guide

SCP (J1850) Invalid or Missing Data for Time / Date

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U1248 mean?

  • OTHER: SCP (J1850) Invalid or Missing Data for Time / Date Source

U1248 quick answer

U1248 is a communication diagnostic code meaning SCP (J1850) data for the time or date is invalid or missing. The code alone does not identify a failed part or confirm which vehicle systems are affected.

Is U1248 generic or manufacturer-specific?

U1248 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U1248 works in the vehicle

SCP (J1850) is a vehicle communication network. This code indicates that a control module received—or expected—but did not have valid time/date information on that network. The code description does not specify the source of the data or the cause of the communication problem.

U1248 symptoms

Possible context includes an incorrect or unavailable clock or date, a warning light, or no noticeable symptom. These are possibilities, not symptoms established by the code description.

Possible causes of U1248

Possible explanations include missing or invalid time/date data or an interruption in communication. The code alone cannot confirm a wiring issue, a particular module failure, or any other specific cause.

How to diagnose U1248

  1. Confirm the code with a compatible scan tool and record any other codes and available freeze-frame information.
  2. Check whether the displayed time or date is incorrect or unavailable, and note any recent battery or electrical-system service.
  3. Use vehicle-specific service information to identify which modules and network checks apply; do not assume the same diagnosis applies to every vehicle.
  4. Have a qualified technician inspect relevant communication data and wiring if the code returns or other symptoms are present.

How to fix U1248

Address the cause only after diagnosis. Depending on vehicle-specific test results, this may involve correcting a time/date setting or repairing a confirmed communication issue. Do not replace a module based on U1248 alone.

Can I drive with U1248?

The code description alone does not establish whether the vehicle is safe or unsafe to drive. If the vehicle drives normally and no important warnings or other symptoms are present, arrange diagnosis according to the vehicle’s service guidance. Stop in a safe place and seek assistance if you notice a serious drivability problem or a critical warning.

U1248 frequently asked questions

What does U1248 mean?

It indicates invalid or missing SCP (J1850) data for the time or date.

Does U1248 identify a failed part?

No. The code describes a data or communication condition, not a confirmed failed component.

Can I clear U1248 without diagnosing it?

A scan tool may clear a stored code, but clearing it does not establish or fix the cause. Check whether it returns and diagnose it using vehicle-specific information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.