Source-backed diagnostic reference

U1308 Code: Meaning & Diagnostic Guide

SCP (J1850) Invalid or Missing Data for Function Read Engine Torque

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U1308 mean?

  • OTHER: SCP (J1850) Invalid or Missing Data for Function Read Engine Torque Source

U1308 quick answer

U1308 indicates invalid or missing data for the “read engine torque” function on an SCP (J1850) communication network. It identifies a data-communication problem, not a confirmed failed part.

Is U1308 generic or manufacturer-specific?

U1308 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U1308 works in the vehicle

SCP (J1850) is a vehicle communication network. This code means a controller did not receive valid engine-torque information when it requested or expected it. The exact interpretation and diagnostic procedure can vary by vehicle.

U1308 symptoms

U1308 may appear with a warning light or other communication codes. If torque information is unavailable, drivability or engine-control symptoms may also occur, but the code alone does not confirm any particular symptom.

Possible causes of U1308

Possible explanations include intermittent network communication, a wiring or connector issue, a power or ground problem, or a controller that is not communicating correctly. These are possibilities to investigate, not confirmed causes.

How to diagnose U1308

  1. Confirm U1308 with a suitable scan tool and note whether it is current or stored.
  2. Check for other codes and record them before clearing anything; related codes may help locate the communication problem.
  3. Use vehicle-specific service information to identify the modules and network circuits involved.
  4. With the vehicle safely parked, visually check accessible network wiring and connectors for looseness, damage, or corrosion.
  5. Have a qualified technician test network communication and relevant power and ground circuits before considering component replacement.

How to fix U1308

Address the cause confirmed by testing. A wiring, connector, power, ground, or communication issue may need repair, but U1308 alone does not justify replacing a controller. Follow vehicle-specific service information or consult a qualified technician.

Can I drive with U1308?

The code alone does not establish whether the vehicle is safe to drive. If it runs or responds abnormally, displays serious warnings, or loses power, stop when safe and arrange professional assessment. Otherwise, have the code checked promptly and follow any vehicle-specific warning messages.

U1308 frequently asked questions

What does U1308 mean?

It means valid data for the “read engine torque” function was missing or invalid on an SCP (J1850) communication network.

Does U1308 identify a failed part?

No. It describes a communication-data problem and does not, by itself, identify which component or circuit caused it.

Can I diagnose U1308 with a code reader?

A code reader may confirm the code, but diagnosis can require a scan tool that reads related modules and vehicle-specific network testing.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.