Source-backed diagnostic reference

U3005 Code: Meaning & Diagnostic Guide

Retained Accessory Power

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U3005 mean?

  • GENERIC: Retained Accessory Power Source
  • GENERIC: Retained Accessory Power Source

U3005 quick answer

U3005 is listed generically as “Retained Accessory Power.” The code label points to the vehicle feature that keeps selected accessories operating after the ignition is switched off; it does not by itself identify a failed part.

Is U3005 generic or manufacturer-specific?

U3005 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U3005 works in the vehicle

Retained accessory power (RAP) allows certain accessories to remain powered temporarily after the vehicle is turned off. How the feature works and which module reports U3005 can vary by vehicle. The supplied reference does not specify a manufacturer, failure condition, or confirmed cause.

U3005 symptoms

There may be no noticeable symptom. Depending on the vehicle and the issue, accessories might stay on longer than expected, switch off unexpectedly, or behave inconsistently. These observations do not confirm that U3005 is the cause.

Possible causes of U3005

The code description alone does not establish a cause. Depending on the vehicle, diagnosis may involve the RAP control logic, its power supply, wiring, or a related module. These are possibilities, not confirmed failures.

How to diagnose U3005

  1. Note which accessories behave unexpectedly and when the behavior occurs.
  2. Use a compatible scan tool to read U3005 and any accompanying codes from all relevant modules; record available code details before clearing anything.
  3. Consult service information for the specific vehicle to identify the reporting module and the intended RAP operation.
  4. Have the relevant power supply, fuses, connectors, wiring, and control functions checked using the vehicle-specific procedure.
  5. If the code returns or the behavior persists, seek diagnosis from a qualified technician.

How to fix U3005

Do not replace a component based on the code label alone. The appropriate repair depends on vehicle-specific test results. Avoid attempting high-voltage system repairs; use a qualified technician when diagnosis involves those systems.

Can I drive with U3005?

U3005 alone does not establish whether a vehicle is safe or unsafe to drive. Check the owner’s manual and consider any other warning lights or symptoms. If essential functions are affected or the vehicle behaves unpredictably, stop driving when safe and arrange professional assessment.

U3005 frequently asked questions

What does U3005 mean?

The supplied generic reference describes U3005 as “Retained Accessory Power,” a feature that can keep selected accessories powered after the ignition is switched off.

Does U3005 identify a failed part?

No. The code description alone does not confirm a failed component or explain why the code was stored.

Can I diagnose U3005 without vehicle-specific information?

Only to a limited extent. The reporting module and diagnostic procedure can vary, so use service information for the specific vehicle and its scan-tool results.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.