Source-backed diagnostic reference

U3007 Code: Meaning & Diagnostic Guide

Control Module Input Power B Circuit/Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U3007 mean?

  • GENERIC: Control Module Input Power B Circuit/Open Source
  • GENERIC: Control Module Input Power B Circuit/Open Source

U3007 quick answer

U3007 is a generic diagnostic trouble code for “Control Module Input Power B Circuit/Open.” It indicates that a control module’s B input-power circuit may be open, but the code alone does not identify the failed part or the vehicle-specific circuit.

Is U3007 generic or manufacturer-specific?

U3007 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U3007 works in the vehicle

“Circuit/open” means the expected electrical path may be interrupted or not supplying power as expected. The meaning of “B” and the affected module can vary by vehicle, so check the manufacturer’s service information for the specific application.

U3007 symptoms

Symptoms are not specified by the code evidence. Depending on the vehicle and affected module, possible signs could include warning lights, intermittent electrical functions, or a stored code with no obvious symptom.

Possible causes of U3007

Possible causes include a fuse or power connection issue, damaged wiring, a poor connector connection, or a problem within a module. These are possibilities, not confirmed failures; U3007 alone does not prove that a module is faulty.

How to diagnose U3007

  1. Record U3007 and any other stored codes and freeze-frame details before clearing codes.
  2. Use vehicle-specific service information to identify the relevant module and its B input-power circuit.
  3. Have a qualified technician inspect the specified fuses, wiring, and connectors for damage or loose connections.
  4. Test the circuit using the vehicle’s service procedure; avoid probing or repairing high-voltage circuits.
  5. After any confirmed fault is addressed, clear the code and check whether it returns.

How to fix U3007

Repair should depend on the fault confirmed by vehicle-specific testing. A damaged connection, wiring fault, or fuse issue may require attention, but do not replace a control module based on U3007 alone. Leave high-voltage diagnosis and repair to appropriately qualified technicians.

Can I drive with U3007?

The code by itself does not establish whether the vehicle is safe to drive. Check for warning messages or loss of important vehicle functions, and consult the owner’s manual or a qualified technician. If a critical function is affected, stop driving when safe and arrange professional assistance.

U3007 frequently asked questions

What does U3007 mean?

U3007 is the generic code “Control Module Input Power B Circuit/Open.” The vehicle-specific meaning of the B circuit must be confirmed using service information.

Does U3007 mean the control module has failed?

No. The code describes an input-power circuit condition and does not, by itself, confirm a failed module.

Can I diagnose U3007 from the code alone?

No. The code is a starting point. Diagnosis requires identifying the applicable circuit for the vehicle and checking it against the correct service procedure.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.