U3019 Code: Meaning & Diagnostic Guide
Control Module Input Power Circuit B/C Correlation
What does U3019 mean?
U3019 quick answer
U3019 is a generic diagnostic trouble code meaning “Control Module Input Power Circuit B/C Correlation.” It indicates that the relationship between two monitored input-power circuits is not as expected; the code alone does not identify a failed part.
Is U3019 generic or manufacturer-specific?
U3019 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How U3019 works in the vehicle
U3019 is a U-category network or control-system code. “Correlation” means a module has detected a mismatch between the readings or behavior of input-power circuits B and C. The exact circuits and test conditions can vary by vehicle, so check the vehicle-specific service information.
U3019 symptoms
The code definition does not establish any particular symptoms. Depending on the vehicle and affected module, a warning light or an electrical feature behaving unexpectedly may be present, but neither is confirmed by this code alone.
Possible causes of U3019
Possible areas to investigate include the relevant power supply, wiring or connectors, grounds, or a module’s readings. These are diagnostic possibilities, not confirmed causes; vehicle-specific information is needed to narrow them down.
How to diagnose U3019
- Confirm U3019 with a suitable scan tool and note which module reported it.
- Record other stored codes and any available freeze-frame or event data before clearing codes.
- Consult service information for the vehicle to identify circuits B and C and the conditions that set the code.
- Have a qualified technician check the specified low-voltage power, ground, wiring, and connectors using the vehicle’s diagnostic procedure.
- After any verified issue is addressed, clear the code if appropriate and check whether it returns.
How to fix U3019
Do not replace a module or other component based on U3019 alone. The repair should follow test results and vehicle-specific service procedures. Avoid high-voltage system work unless performed by an appropriately trained professional.
Can I drive with U3019?
U3019 alone does not establish whether a vehicle is safe or unsafe to drive. Follow the owner’s manual and consider the vehicle’s behavior and warning messages. If important functions are affected or the vehicle behaves abnormally, stop in a safe place and seek professional advice.
U3019 frequently asked questions
What does U3019 mean?
It means “Control Module Input Power Circuit B/C Correlation”: a module detected an unexpected relationship between two monitored input-power circuits.
Does U3019 identify a failed component?
No. The code describes a detected correlation issue, not a confirmed failed part.
Can U3019 be diagnosed the same way on every vehicle?
No. The meaning of circuits B and C and the diagnostic conditions can be vehicle-specific. Use service information for the exact vehicle.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.