Source-backed diagnostic reference

U301E Code: Meaning & Diagnostic Guide

Control Module Wake-up Circuit B/Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U301E mean?

  • GENERIC: Control Module Wake-up Circuit B/Open Source
  • GENERIC: Control Module Wake-up Circuit B/Open Source

U301E quick answer

U301E is generically defined as “Control Module Wake-up Circuit B/Open.” It indicates that a vehicle diagnostic system detected a possible open or interruption in a control module wake-up circuit; it does not by itself confirm which part has failed.

Is U301E generic or manufacturer-specific?

U301E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U301E works in the vehicle

A wake-up circuit helps signal a control module to become active. “B” identifies the circuit designation, and “open” generally means the expected electrical path may be interrupted. The precise circuit and diagnostic meaning can vary by vehicle, so check vehicle-specific service information.

U301E symptoms

Depending on the vehicle and the underlying issue, possible context may include a warning light, communication or starting concerns, or intermittent operation of vehicle systems. Some vehicles may show no obvious symptoms.

Possible causes of U301E

Possibilities include a wiring or connector problem, a power or ground issue, or a fault involving a related control module. The code alone does not establish any of these as the cause.

How to diagnose U301E

  1. Record U301E and any other stored codes and note the conditions in which they appeared.
  2. Look up the code and circuit information for the exact vehicle using reliable service data.
  3. Have a qualified technician check relevant low-voltage wiring, connectors, power, and grounds according to the vehicle-specific procedure.
  4. Use the test results to identify the cause before replacing parts or clearing the code.

How to fix U301E

The appropriate repair depends on vehicle-specific testing. A technician may repair a verified wiring or connection issue or address another confirmed fault. Do not replace a module based on U301E alone.

Can I drive with U301E?

The code alone cannot determine whether the vehicle is safe to drive. If the vehicle has starting problems, loses important functions, or shows other serious warnings, stop driving when safe and seek qualified assistance. Consult the owner’s manual or a technician for vehicle-specific guidance.

U301E frequently asked questions

What does U301E mean?

It is generically defined as “Control Module Wake-up Circuit B/Open,” indicating a possible interruption in a designated module wake-up circuit.

Does U301E identify a failed part?

No. It reports a detected circuit condition, not a confirmed failed component. Vehicle-specific diagnosis is needed.

Can I diagnose U301E without vehicle-specific information?

Not reliably. The circuit designation and testing procedure can vary by vehicle, so use service information for the exact vehicle and consult a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.