Source-backed diagnostic reference

U301F Code: Meaning & Diagnostic Guide

Control Module Wake-up Circuit B Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U301F mean?

  • GENERIC: Control Module Wake-up Circuit B Low Source
  • GENERIC: Control Module Wake-up Circuit B Low Source

U301F quick answer

U301F is a generic diagnostic trouble code meaning “Control Module Wake-up Circuit B Low.” It indicates that a low electrical condition was detected on a control-module wake-up circuit; it does not, by itself, identify a failed part.

Is U301F generic or manufacturer-specific?

U301F has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U301F works in the vehicle

A wake-up circuit helps signal a vehicle control module to become active. “Circuit B” labels the circuit in the code description, and “low” means its detected electrical level was below the expected range. The circuit’s design and the code-setting conditions can vary by vehicle.

U301F symptoms

Depending on the vehicle and the effect of the circuit, possible context may include a warning light, communication-related codes, or a module that does not wake or operate as expected. Some vehicles may show no obvious symptoms.

Possible causes of U301F

Possible areas to investigate include wiring or connector problems, an issue affecting circuit power or ground, or a control-module or circuit fault. The code alone does not confirm any of these causes.

How to diagnose U301F

  1. Record U301F and any other stored codes, along with available freeze-frame or scan-tool data.
  2. Use vehicle-specific service information to identify the circuit, its expected readings, and the conditions that set the code.
  3. Check relevant fuses and inspect accessible wiring and connectors for damage, looseness, corrosion, or poor connections.
  4. Have a qualified technician perform appropriate circuit tests and confirm the fault before replacing components.
  5. Clear the code only after any identified issue is addressed, then check whether it returns under the specified test conditions.

How to fix U301F

The correct repair depends on diagnosis. Address any confirmed wiring, connection, power, or ground issue; consider a module only if testing and vehicle-specific procedures support that conclusion. Do not replace parts based on the code alone.

Can I drive with U301F?

U301F alone does not establish whether a vehicle is safe to drive. Consider the vehicle’s behavior and any other warnings, and consult a qualified technician if a system is not working normally or you are unsure whether continued driving is appropriate.

U301F frequently asked questions

What does U301F mean?

It means “Control Module Wake-up Circuit B Low”: a low electrical condition was detected on a control-module wake-up circuit.

Does U301F identify a failed control module?

No. The code describes a detected circuit condition, not a confirmed failed component.

Can U301F cause symptoms?

Possibly. Depending on the vehicle, there may be warnings or a module-related operating issue, but some vehicles may have no obvious symptoms.

Can I diagnose U301F from the code alone?

No. Vehicle-specific service information and circuit testing are needed to determine why the condition was detected.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.