Source-backed diagnostic reference

U351C Code: Meaning & Diagnostic Guide

High Voltage System Interlock Circuit D High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U351C mean?

  • GENERIC: High Voltage System Interlock Circuit D High Source
  • GENERIC: High Voltage System Interlock Circuit D High Source

U351C quick answer

U351C is a generic diagnostic trouble code for “High Voltage System Interlock Circuit D High.” It indicates that the circuit’s signal was detected as high; it does not identify a confirmed failed part or apply to every vehicle.

Is U351C generic or manufacturer-specific?

U351C has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U351C works in the vehicle

A high-voltage interlock circuit helps monitor whether parts of a high-voltage system are properly connected or secured. “Circuit D high” describes the signal detected by the vehicle, not proof that a particular component has failed. The exact meaning and test procedure can vary by vehicle.

U351C symptoms

Depending on the vehicle and how its control systems respond, the code may appear with a warning message, a warning light, or reduced or unavailable vehicle functions. These symptoms are not confirmed by the supplied code definition and may have other causes.

Possible causes of U351C

Possible explanations can include a connection or wiring issue, a problem in an interlock-related component, or a control-system or signal issue. The code alone does not establish which, if any, is present.

How to diagnose U351C

  1. Check the vehicle’s service information for the exact definition and diagnostic procedure for U351C.
  2. Record all stored codes and available freeze-frame data before clearing anything.
  3. Have a qualified technician assess the interlock system using the vehicle-specific procedure.
  4. Do not disconnect, probe, or repair high-voltage components unless trained and equipped to do so.

How to fix U351C

Base repairs on vehicle-specific testing rather than replacing parts from the code alone. Have any confirmed wiring, connection, interlock, or control-system fault addressed by a qualified technician. No specific failed component or repair is established by the supplied evidence.

Can I drive with U351C?

The code definition alone cannot determine whether the vehicle is safe to drive. Follow any vehicle warnings and the owner’s manual; if the vehicle reports a high-voltage-system fault or its operation is impaired, stop using it when safe and seek qualified service.

U351C frequently asked questions

What does U351C mean?

It is a generic code for “High Voltage System Interlock Circuit D High.” The precise interpretation depends on the vehicle.

Does U351C identify a failed part?

No. The code describes a detected circuit signal and does not confirm that any particular component has failed.

Can I diagnose or repair this circuit myself?

High-voltage systems can be hazardous. Do not probe or repair high-voltage components; use a qualified technician and vehicle-specific service information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.