BYD B1BF400
Front wiper reset signal fault
Quick answer
B1BF400 is a BYD front wiper reset signal fault. Verified applicability is BYD ATTO 3 model years 2022–2026 (Global).
This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.
Watch Videos
Relevant videos play here without leaving this diagnostic page.
No sufficiently relevant embeddable video has been accepted for this diagnostic yet.
Videos are supporting material and never override OEM or regulator evidence.
1. What does B1BF400 mean?
B1BF400 is a BYD front wiper reset signal fault. Verified applicability is BYD ATTO 3 model years 2022–2026 (Global).
2. Technical explanation
The verified diagnostic meaning for DTC B1BF400 is “Front wiper reset signal fault.” The supplied evidence does not identify the specific failed component, circuit condition, test procedure, or repair.
3. What system is affected?
Wiper system; specifically the front wiper reset signal.
4. How serious is this code?
Unknown. Severity has not yet been established by verified evidence.
5. Symptoms you may notice
- A front wiper reset signal fault is recorded as DTC B1BF400.
- Additional driver-visible symptoms have not yet been established by verified evidence.
6. Possible causes
- Not yet established by verified evidence.
7. Can I still drive the vehicle?
Unknown. Whether the vehicle can be driven with B1BF400 has not yet been established by verified evidence.
8. Can I charge the vehicle?
Unknown. Whether the vehicle can be charged with B1BF400 has not yet been established by verified evidence.
9. What you can safely do
- Arrange diagnosis by a qualified BYD service provider or technician.
- Do not assume a particular component requires replacement based on this code alone.
10. Step-by-step troubleshooting
- Confirm the stored DTC is B1BF400 using suitable diagnostic equipment.
- Use manufacturer-approved diagnostic information to identify the fault source. Specific test steps have not yet been established by verified evidence.
11. When to contact service
Service requirement has not yet been established by verified evidence. A qualified BYD service provider can diagnose the front wiper reset signal fault.
12. What the service center may check
- Verify DTC B1BF400 and review available diagnostic information for the vehicle. Further service checks have not yet been established by verified evidence.
13. Possible repair or resolution
- Not yet established by verified evidence.
14. Affected vehicles
- BYD ATTO 3 · 2022–2026 · GLOBAL
15. Related TSBs / service bulletins
- No technical service bulletin information was supplied in the verified evidence.
16. Recall information
- No recall information was supplied in the verified evidence.
17. Official manufacturer information
Verified source: OBDTotal technical manual index, “BYD ATTO 3 diagnostic evidence,” locator: ATTO 3 / Yuan Plus (SC2E) / B1BF400. The evidence identifies B1BF400 as “Front wiper reset signal fault.”
- OBDTotal technical manual index: BYD ATTO 3 diagnostic evidence · technical_manual
19. Frequently asked questions
What does BYD code B1BF400 mean?
It means “Front wiper reset signal fault.”
Which vehicles are verified as applicable?
BYD ATTO 3, model years 2022 through 2026, Global region.
Can I drive with B1BF400?
Not yet established by verified evidence.
What repairs fix B1BF400?
Not yet established by verified evidence.