BYD P1BC600
P1BC600 indicates a Front motor controller Hall current sensor C fault on applicable BYD ATTO 3 vehicles.
Evidence snapshot
Last evidence review: 2026-09-25. Applicability is shown only where a model relationship is supported by evidence.
Quick answer
P1BC600 indicates a Front motor controller Hall current sensor C fault on applicable BYD ATTO 3 vehicles.
This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.
Watch Videos
Relevant videos play here without leaving this diagnostic page.
No sufficiently relevant embeddable video has been accepted for this diagnostic yet.
Videos are supporting material and never override OEM or regulator evidence.
1. What does BYD P1BC600 mean?
P1BC600 indicates a Front motor controller Hall current sensor C fault on applicable BYD ATTO 3 vehicles.
2. Technical explanation
Verified evidence identifies P1BC600 as a fault involving Hall current sensor C in the front motor controller. The supplied evidence does not establish the underlying failure mechanism, test procedure, or repair method.
3. What system is affected?
Motor controller — front motor controller Hall current sensor C.
4. How serious is this code?
Unknown. Severity is not established by the verified evidence.
5. BYD P1BC600 symptoms you may notice
- Not yet established by verified evidence.
6. Possible causes of BYD P1BC600
- A fault reported for front motor controller Hall current sensor C. The specific root cause is not yet established by verified evidence.
7. Can I drive with BYD P1BC600?
Unknown. Whether the vehicle can be driven is not established by verified evidence.
8. Can I charge with BYD P1BC600?
Unknown. Whether the vehicle can be charged is not established by verified evidence.
9. What you can safely do
- Arrange diagnosis by a qualified BYD EV service provider.
- Do not attempt high-voltage or motor-controller repair work yourself.
10. How to troubleshoot BYD P1BC600
- Use appropriate professional diagnostic equipment and service information to investigate P1BC600. Detailed diagnostic steps are not established by the supplied verified evidence.
- Do not perform invasive work on the motor controller or high-voltage electrical system without qualified EV service training.
11. When to contact service
Service requirement is listed as unknown. Because this DTC concerns the front motor controller, professional diagnosis is appropriate; urgency is not established by the verified evidence.
12. What the service center may check
- Confirm the presence and status of DTC P1BC600 using suitable diagnostic equipment.
- Further specific inspection, measurement, and repair checks are not yet established by verified evidence.
13. Possible repair or resolution for BYD P1BC600
- Not yet established by verified evidence.
14. Affected vehicles
- BYD ATTO 3 · 2022–2026 · GLOBAL
15. Related TSBs / service bulletins
- Not yet established by verified evidence.
16. Recall information
- Not yet established by verified evidence.
17. Official manufacturer information
Verified source coverage for this diagnostic is listed below. Open the cited document for the full manufacturer or regulator context.
- OBDTotal technical manual index: BYD ATTO 3 diagnostic evidence · technical_manual
19. BYD P1BC600 frequently asked questions
What does BYD code P1BC600 mean?
For the BYD ATTO 3, verified evidence defines P1BC600 as a Front motor controller Hall current sensor C fault.
Which vehicles are covered by the supplied evidence?
The supplied applicability evidence covers BYD ATTO 3 model years 2022 through 2026 in the GLOBAL region.
Is it safe to drive with P1BC600?
Not yet established by verified evidence.
Can I charge the vehicle with P1BC600?
Not yet established by verified evidence.
20. Sources & verification
Evidence sources: 1 · Page reviewed 2026-09-25 · Editorial & quality policy