EV Diagnostics
Verified EV diagnostic knowledge page

Honda B1EDA

All Rights Reserved Page 1 of 1

DriveNot yet established by verified evidence.
ChargeNot yet established by verified evidence.
ServiceContact a qualified Honda service facility if B1EDA is present, particularly if relevant units were recently replaced or interchanged. The supplied evidence supports checking part-number compatibility but does not provide a complete repair procedure.
Confidence95%

Quick answer

For a 2013 Honda Fit (US), DTC B1EDA is documented in an American Honda service communication as a code that can set when certain units are interchanged despite appearing the same, or when replacement units do not have matching part-number suffixes (A01 or A02) on both sides.

This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.

Video guides

Watch Videos

Relevant videos play here without leaving this diagnostic page.

No sufficiently relevant embeddable video has been accepted for this diagnostic yet.

Videos are supporting material and never override OEM or regulator evidence.

1. What does B1EDA mean?

For a 2013 Honda Fit (US), DTC B1EDA is documented in an American Honda service communication as a code that can set when certain units are interchanged despite appearing the same, or when replacement units do not have matching part-number suffixes (A01 or A02) on both sides.

2. Technical explanation

The verified NHTSA-hosted American Honda communication states that replacement must use a unit with the exact same part number. It specifically says the last three digits of the part number—A01 or A02—must match on both sides. The communication warns that units may look the same but cannot be interchanged without software problems, which can cause DTC B18DA or B1EDA to set. The supplied evidence does not identify the component name, diagnostic system name, or a complete diagnostic procedure for B1EDA.

3. What system is affected?

Not yet established by verified evidence.

4. How serious is this code?

Unknown. The supplied verified evidence does not assign a severity level.

5. Symptoms you may notice

  • A B1EDA diagnostic trouble code may be set after incompatible-looking-alike units are interchanged or replacement units have nonmatching A01/A02 part-number suffixes, according to the cited Honda communication.
  • Other symptoms are not yet established by verified evidence.

6. Possible causes

  • A unit was replaced with one that does not have the exact same part number.
  • The last three part-number digits (A01 or A02) do not match on both sides.
  • Units that look alike were interchanged, resulting in software problems.

7. Can I still drive the vehicle?

Not yet established by verified evidence.

8. Can I charge the vehicle?

Not yet established by verified evidence.

9. What you can safely do

  • Do not interchange units solely because they look identical.
  • When servicing a relevant unit, have the exact part number verified.
  • Ensure the A01 or A02 suffix matches on both sides when applicable.
  • Use a qualified Honda service facility for diagnosis and parts verification.

10. Step-by-step troubleshooting

  1. Review recent repairs or component replacements for possible interchange of visually similar units.
  2. Compare the installed unit part numbers with the required replacement part number.
  3. Verify whether the final three digits, A01 or A02, match on both sides as specified in the Honda communication.
  4. No further troubleshooting procedure is established by the supplied verified evidence.

11. When to contact service

Contact a qualified Honda service facility if B1EDA is present, particularly if relevant units were recently replaced or interchanged. The supplied evidence supports checking part-number compatibility but does not provide a complete repair procedure.

12. What the service center may check

  • Inspect relevant replacement-unit part numbers.
  • Confirm the replacement unit has the exact same part number.
  • Confirm the last three digits—A01 or A02—match on both sides.
  • Check whether visually similar units were interchanged.

13. Possible repair or resolution

  • Use only a replacement unit with the exact same part number.
  • Ensure the A01 or A02 suffix matches on both sides when applicable.
  • The supplied evidence does not establish whether additional programming, calibration, or component replacement is required.

14. Affected vehicles

15. Related TSBs / service bulletins

  • NHTSA Manufacturer Communication PDF 10145895: A18100B, published October 13, 2018. The communication states that incompatible interchange of similar-looking units, or nonmatching A01/A02 suffixes, can cause B18DA or B1EDA to set.

16. Recall information

  • Not yet established by verified evidence.

17. Official manufacturer information

Verified official source: NHTSA-hosted American Honda Motor Co. communication, MC-10145895-9999.pdf (A18100B), published October 13, 2018. It applies in the supplied database to the 2013 Honda Fit in the US.

19. Frequently asked questions

What does Honda code B1EDA indicate?

The supplied Honda communication links B1EDA to software problems caused by interchanging similar-looking units or using a replacement unit without the exact matching part number, including matching A01/A02 suffixes on both sides when applicable.

Can I drive with B1EDA?

Not yet established by verified evidence.

Is B1EDA related to charging or high-voltage battery service?

Not yet established by verified evidence.

Which vehicle is covered by the supplied evidence?

The supplied applicability record identifies a 2013 Honda Fit for the US market.

What should be checked first after B1EDA appears following a repair?

The verified communication supports checking whether relevant units were interchanged and whether the replacement unit has the exact required part number with matching A01 or A02 suffixes on both sides.

20. Sources & verification

Verified
Honda B1EDA: All Rights Reserved Page 1 of 1 | EV Diagnostics