Verified EV diagnostic knowledge page

Jeep B235A

B235A-00 is documented in a Jeep manufacturer communication as an ECU calibration-related repair action: install the calibration file with the correct policy. The same communication also references B22A9-49.

DriveNot yet established by verified evidence.
ChargeNot yet established by verified evidence.
ServiceService is appropriate because the verified repair action requires ECU calibration verification and installation. Driving and charging status are not established by verified evidence.
Confidence95%

Evidence snapshot

Verified sources1
Affected models2
Model years2023–2024
TSB / bulletin sources1

Last evidence review: 2026-09-24. Applicability is shown only where a model relationship is supported by evidence.

Quick answer

B235A-00 is documented in a Jeep manufacturer communication as an ECU calibration-related repair action: install the calibration file with the correct policy. The same communication also references B22A9-49.

This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.

Video guides

Watch Videos

Relevant videos play here without leaving this diagnostic page.

No sufficiently relevant embeddable video has been accepted for this diagnostic yet.

Videos are supporting material and never override OEM or regulator evidence.

1. What does Jeep B235A mean?

B235A-00 is documented in a Jeep manufacturer communication as an ECU calibration-related repair action: install the calibration file with the correct policy. The same communication also references B22A9-49.

2. Technical explanation

Verified evidence describes B235A-00 as: “Repair Action: Install Calibration file with correct policy.” The manufacturer communication directs technicians to read fault memory from all nodes and check/download the correct calibration file for the vehicle’s current configuration. It also contains the phrases “ECU-In-Plant-Mode” and “ECU Internal Performance - Internal Electronic Failure - DTC B22A9-49 Repair.” The evidence does not establish a fuller technical root cause for B235A beyond this calibration-related repair direction.

3. What system is affected?

An ECU is implicated by the manufacturer communication. The specific ECU or vehicle subsystem is not yet established by verified evidence.

4. How serious is this code?

Unknown. Verified evidence does not assign a severity level.

5. Jeep B235A symptoms you may notice

Not yet established by verified evidence.

6. Possible causes of Jeep B235A

  • Calibration file or calibration policy mismatch is indicated by the specified repair action.
  • Any additional cause is not yet established by verified evidence.

7. Can I drive with Jeep B235A?

Not yet established by verified evidence.

8. Can I charge with Jeep B235A?

Not yet established by verified evidence.

9. What you can safely do

  • Have a qualified Jeep service provider read fault memory from all vehicle nodes and verify the correct calibration for the vehicle’s current configuration.
  • Do not attempt ECU programming or calibration installation without appropriate manufacturer service procedures and equipment.

10. How to troubleshoot Jeep B235A

  1. Read fault memory of all nodes, as directed in the manufacturer communication.
  2. Check the calibration file applicable to the current vehicle configuration.
  3. Download/install the correct calibration file and policy using authorized service procedures. The detailed procedure is not included in the supplied evidence.

11. When to contact service

Service is appropriate because the verified repair action requires ECU calibration verification and installation. Driving and charging status are not established by verified evidence.

12. What the service center may check

  • Read fault memory of all nodes.
  • Confirm the vehicle’s current configuration.
  • Check whether the installed calibration file and policy are correct for that configuration.
  • Install the correct calibration file with the correct policy, following manufacturer procedures.

13. Possible repair or resolution for Jeep B235A

  • Install the calibration file with the correct policy.
  • No further repair outcome or confirmation criteria are established by the supplied verified evidence.

14. Affected vehicles

15. Related TSBs / service bulletins

  • NHTSA Manufacturer Communication 11004342 / 9100386, published July 11, 2024. It directs technicians to read fault memory of all nodes and check/download the correct calibration file for the vehicle configuration. Source: https://static.nhtsa.gov/odi/ffdd/tsbs/TSBS_RECEIVED_2020-2024.zip#nhtsa_id=11004342

16. Recall information

No recall relationship is established by verified evidence.

17. Official manufacturer information

Verified source coverage for this diagnostic is listed below. Open the cited document for the full manufacturer or regulator context.

19. Jeep B235A frequently asked questions

What does Jeep DTC B235A-00 mean?

The supplied official manufacturer communication describes B235A-00 as a repair action to install the calibration file with the correct policy. It does not establish a more specific plain-language fault definition.

What repair is specified for B235A-00?

The verified repair direction is to check/download and install the correct calibration file with the correct policy for the vehicle’s current configuration.

Can I continue driving or charging with B235A-00?

Not yet established by verified evidence.

Which vehicles are included in the supplied applicability evidence?

The supplied evidence identifies US-market 2023–2024 Jeep Grand Cherokee and 2023–2024 Jeep Wagoneer vehicles. VIN-level applicability is not established by the supplied evidence.

20. Sources & verification

Verified

Evidence sources: 1 · Page reviewed 2026-09-24 · Editorial & quality policy