EV Diagnostics
Verified EV diagnostic knowledge page

Nissan B00A0-00

071 26. Select Close . Figure 16  After selecting Close, the screen in Figure 17 should display (the DTC is erased). Figure 17 13/13 NTB19-071 27. Turn OFF the ignition and di sco

Common search variants: B00A000 · B00A0 00 · B00A0_00 · Search ignores case and common separators.

DriveNot yet established by verified evidence.
ChargeNot yet established by verified evidence.
ServiceService involvement is not explicitly classified in the supplied data. However, the documented procedure requires Nissan CONSULT equipment and is appropriate for qualified service personnel.
Confidence95%

Quick answer

Verified evidence identifies B00A0-00 in Nissan’s NTB19-071-series procedure as an AIR BAG DTC that should be the only DTC displayed before it is erased with CONSULT. The supplied evidence does not establish the DTC’s plain-language fault definition or root cause.

This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.

Video guides

Watch Videos

Relevant videos play here without leaving this diagnostic page.

No sufficiently relevant embeddable video has been accepted for this diagnostic yet.

Videos are supporting material and never override OEM or regulator evidence.

1. What does B00A0-00 mean?

Verified evidence identifies B00A0-00 in Nissan’s NTB19-071-series procedure as an AIR BAG DTC that should be the only DTC displayed before it is erased with CONSULT. The supplied evidence does not establish the DTC’s plain-language fault definition or root cause.

2. Technical explanation

Nissan’s official NTB19-071, NTB19-071A, and NTB19-071B communications instruct a technician to connect CONSULT, select Diagnosis (All Systems), select AIR BAG, confirm that B00A0-00 is the only displayed DTC, and use ERASE/Execute/Close. The procedure states that the DTC should then be erased. The supplied excerpts do not establish why B00A0-00 set, whether erasure alone is a complete repair, or whether the DTC may return.

3. What system is affected?

AIR BAG system, as identified by the official procedure’s instruction to select AIR BAG before viewing and erasing B00A0-00.

4. How serious is this code?

Unknown. Severity is not established by the verified evidence.

5. Symptoms you may notice

  • A stored AIR BAG DTC B00A0-00 may be displayed in CONSULT.
  • No driver-visible symptoms are established by the supplied verified evidence.

6. Possible causes

  • Not yet established by verified evidence.

7. Can I still drive the vehicle?

Not yet established by verified evidence.

8. Can I charge the vehicle?

Not yet established by verified evidence.

9. What you can safely do

  • Arrange diagnosis by a qualified Nissan service provider or technician with the appropriate CONSULT equipment.
  • Do not rely on code clearing as proof that an underlying condition has been corrected; the supplied evidence does not establish the cause or long-term result.
  • Do not perform air-bag or high-voltage-system repairs yourself.

10. Step-by-step troubleshooting

  1. The verified Nissan procedure uses CONSULT to enter Diagnosis (All Systems), verify vehicle information, select AIR BAG, and check that B00A0-00 is the only displayed DTC.
  2. The procedure then directs use of ERASE, Execute, and Close; it states that B00A0-00 should be erased afterward.
  3. Further diagnostic steps, component tests, and root-cause isolation are not established by the supplied evidence.

11. When to contact service

Service involvement is not explicitly classified in the supplied data. However, the documented procedure requires Nissan CONSULT equipment and is appropriate for qualified service personnel.

12. What the service center may check

  • Connect the CONSULT vehicle interface to the CONSULT PC and vehicle after the documented ignition-cycle step.
  • Select Diagnosis (All Systems) and confirm vehicle information.
  • Select AIR BAG.
  • Confirm B00A0-00 is the only displayed DTC.
  • Use the documented ERASE, Execute, and Close sequence and verify the DTC is erased.

13. Possible repair or resolution

  • The official NTB19-071-series excerpts document erasure of B00A0-00 through CONSULT.
  • A permanent repair, parts replacement, or confirmation that the code will not return is not yet established by verified evidence.

14. Affected vehicles

15. Related TSBs / service bulletins

  • Nissan NTB19-071, published September 12, 2019; NHTSA manufacturer communication MC-10165784.
  • Nissan NTB19-071A, published March 5, 2021; NHTSA manufacturer communication MC-10190213.
  • Nissan NTB19-071B, published April 26, 2022; NHTSA manufacturer communication MC-10213158.

16. Recall information

  • No recall is established by the supplied verified evidence.

17. Official manufacturer information

Official NHTSA-hosted Nissan communications: NTB19-071B (https://static.nhtsa.gov/odi/tsbs/2022/MC-10213158-0001.pdf), NTB19-071A (https://static.nhtsa.gov/odi/tsbs/2021/MC-10190213-0001.pdf), and NTB19-071 (https://static.nhtsa.gov/odi/tsbs/2019/MC-10165784-0001.pdf). The supplied applicability records list US Nissan LEAF vehicles spanning 2011–2022, but the excerpts provided do not establish exact model-year applicability for each bulletin revision.

19. Frequently asked questions

What system is associated with B00A0-00 in the supplied Nissan procedure?

The procedure directs the technician to select AIR BAG and states that B00A0-00 should be the only DTC displayed there.

Can B00A0-00 be erased?

Yes. The NTB19-071-series excerpts instruct use of CONSULT ERASE, Execute, and Close, and state that the DTC should be erased afterward.

What causes B00A0-00?

Not yet established by verified evidence.

Is it safe to drive or charge with B00A0-00?

Not yet established by verified evidence.

20. Sources & verification

Accepted ResearchVerified
Nissan B00A0-00: 071 26. Select Close . Figure 16  After selecting… | EV Diagnostics