Source-backed diagnostic reference

P1108 Code: Meaning & Diagnostic Guide

BARO Circuit High Input

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1108 mean?

  • ACURA: BARO Circuit High Input Source
  • BUICK: BARO To MAP Sensor Circuit Comparison Too High Source
  • CADILLAC: BARO To MAP Sensor Circuit Comparison Too High Source
  • CHEVY: BARO To MAP Sensor Circuit Comparison Too High Source
  • CHRYSLER: BARO To MAP Sensor Circuit Comparison Too High Source
  • FORD: Dual Alternator Battery Lamp Circuit Malfunction Source
  • GM: BARO To MAP Sensor Circuit Comparison Too High Source
  • GMC: BARO To MAP Sensor Circuit Comparison Too High Source
  • HONDA: BARO Circuit High Input Source
  • INFINITI: BARO Circuit High Input Source
  • LINCOLN: Dual Alternator Battery Lamp Circuit Malfunction Source
  • MERCURY: Dual Alternator Battery Lamp Circuit Malfunction Source
  • OLDSMOBILE: BARO To MAP Sensor Circuit Comparison Too High Source
  • OTHER: Dual Alternator Battery Lamp Circuit Malfunction Source
  • SATURN: BARO To MAP Sensor Circuit Comparison Too High Source
  • VOLKSWAGEN: Oxygen Sensor Heating Circuit Bank 2 Sensor 1 Output Too Low Source

P1108 quick answer

P1108 is a manufacturer-specific powertrain code, so its exact meaning depends on the vehicle. Reference listings associate it with a BARO sensor circuit reading high, a BARO-to-MAP comparison that is too high, or a dual-alternator battery-lamp circuit fault. Check the vehicle-specific definition before diagnosing.

Is P1108 generic or manufacturer-specific?

P1108 currently has manufacturer-labelled reference definitions for ACURA, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1108 works in the vehicle

BARO means barometric pressure, or atmospheric pressure. MAP means manifold absolute pressure, measured inside the engine’s intake manifold. On some vehicles, P1108 concerns a high BARO signal or a mismatch between BARO and MAP readings; other applications use the code for a different circuit. The code alone does not identify a failed part.

P1108 symptoms

Depending on the vehicle and the underlying issue, there may be a check-engine or battery warning light, changes in engine performance, or no obvious symptoms. These are possibilities, not symptoms established by the code itself.

Possible causes of P1108

Possible causes depend on the vehicle’s definition of P1108. For a BARO/MAP interpretation, possibilities include a sensor, wiring, connector, power or ground issue, or an implausible pressure reading. For a battery-lamp circuit interpretation, the charging-system circuit may need investigation. The code alone does not confirm any of these faults.

How to diagnose P1108

  1. Confirm the vehicle’s year, make, model, engine, and the manufacturer-specific description for P1108.
  2. Use a scan tool to record all stored codes and freeze-frame data before clearing anything.
  3. Follow the correct vehicle-specific diagnostic procedure; check relevant wiring and connectors for visible damage or poor connections.
  4. If the definition involves BARO and MAP, compare scan-tool readings under the conditions specified by the service information.
  5. If the definition involves a battery-lamp circuit, have the related charging-system circuit checked using the vehicle’s service procedure.
  6. If the code returns or the test results are unclear, seek diagnosis from a qualified technician.

How to fix P1108

Base repairs on test results and the correct service information for the vehicle. A repair might involve addressing a verified wiring or connection fault, or replacing a component only after it has been confirmed defective. Do not replace a sensor based only on P1108.

Can I drive with P1108?

Driving advice depends on the vehicle and any accompanying symptoms or warning lights. If the vehicle runs abnormally, displays a battery warning, or shows other concerning changes, arrange prompt professional assessment and follow the owner’s manual. The code by itself does not establish whether continued driving is safe.

P1108 frequently asked questions

What does P1108 mean?

P1108 is manufacturer-specific. Depending on the vehicle, it may refer to a BARO circuit reading high, a BARO-to-MAP comparison that is too high, or another circuit fault.

Does P1108 mean the BARO sensor has failed?

No. A sensor fault is one possibility for some definitions, but wiring, connections, or other causes may also need checking. Confirm the vehicle-specific code meaning and test before replacing parts.

Can I drive with P1108?

The code alone cannot determine that. Consider the vehicle’s behavior and warning lights, consult the owner’s manual, and seek professional advice if symptoms or a battery warning are present.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.