Source-backed diagnostic reference

P1277 Code: Meaning & Diagnostic Guide

Accelerator Pedal Position Sensor 1 Circuit Low Voltage

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1277 mean?

  • BUICK: Accelerator Pedal Position Sensor 1 Circuit Low Voltage Source
  • CADILLAC: Accelerator Pedal Position Sensor 1 Circuit Low Voltage Source
  • CHEVY: Accelerator Pedal Position Sensor 1 Circuit Low Voltage Source
  • CHRYSLER: Accelerator Pedal Position Sensor 1 Circuit Low Voltage Source
  • FORD: Cylinder #7 High To Low Side Open Source
  • GM: Accelerator Pedal Position Sensor 1 Circuit Low Voltage Source
  • GMC: Accelerator Pedal Position Sensor 1 Circuit Low Voltage Source
  • LINCOLN: Cylinder 7 High To Low Side Open Source
  • MERCURY: Cylinder 7 High To Low Side Open Source
  • OLDSMOBILE: Accelerator Pedal Position Sensor 1 Circuit Low Voltage Source
  • OTHER: Cylinder #7 High To Low Side Open Source
  • SATURN: Accelerator Pedal Position Sensor 1 Circuit Low Voltage Source

P1277 quick answer

P1277 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. In the supplied references, several GM brands associate it with low voltage in Accelerator Pedal Position Sensor 1's circuit, while Ford, Lincoln, and Mercury references describe a Cylinder 7 high-to-low side open. Confirm the definition for your vehicle before diagnosing it.

Is P1277 generic or manufacturer-specific?

P1277 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, FORD, GM and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1277 works in the vehicle

A circuit-low description means the control module detected a voltage lower than expected in the named circuit; it does not by itself prove that a sensor or other component has failed. The alternate Cylinder 7 description refers to an open electrical path between the specified high- and low-side controls. Use the vehicle's year, make, model, engine, and a reliable code reference to identify which definition applies.

P1277 symptoms

Depending on the vehicle and applicable definition, symptoms may include a warning light, reduced engine response, or rough running. P1277 can also be stored without obvious symptoms. These are possibilities, not symptoms established by the code alone.

Possible causes of P1277

If the applicable definition concerns the accelerator-pedal sensor circuit, possible causes include a wiring or connector problem, a supply or ground issue, or a sensor fault. If it concerns Cylinder 7, possible causes may involve that cylinder's control wiring or circuit. The code alone does not identify a confirmed failed part.

How to diagnose P1277

  1. Verify the vehicle details and confirm the manufacturer-specific meaning of P1277.
  2. Scan for other stored codes and note any available freeze-frame data, which records conditions when the fault was detected.
  3. Follow the diagnostic procedure for the confirmed definition; inspect relevant accessible wiring and connectors for damage, looseness, or corrosion.
  4. Have a qualified technician test the applicable circuit and components against vehicle-specific specifications before replacing parts.
  5. Clear the code only after diagnosis or repair, then check whether it returns under appropriate test conditions.

How to fix P1277

The correct repair depends on the vehicle-specific definition and test results. A wiring or connector repair may be needed, or a component may require replacement if testing confirms it has failed. Avoid replacing parts based on the code alone; consult vehicle-specific service information or a qualified technician.

Can I drive with P1277?

Driving advice depends on symptoms and the vehicle. If engine response is reduced, running is rough, or the vehicle feels unsafe or unpredictable, stop in a safe place and arrange professional assistance. If there are no noticeable symptoms, have the code checked promptly and follow the vehicle owner's manual; the code alone cannot establish that continued driving is safe.

P1277 frequently asked questions

What does code P1277 mean?

It is manufacturer-specific. Supplied references list an accelerator-pedal sensor circuit-low definition for several GM brands and a Cylinder 7 high-to-low side open definition for Ford, Lincoln, and Mercury.

Does P1277 mean the accelerator pedal sensor has failed?

Not necessarily. Where that definition applies, the code indicates a low-voltage condition in the circuit; wiring, connections, supply, ground, or the sensor may need testing.

Can I drive with P1277?

The code alone cannot determine whether driving is safe. If the vehicle has reduced response, rough running, or unpredictable behavior, stop safely and seek assistance; otherwise, arrange prompt diagnosis and consult the owner's manual.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.