P1370 Code: Meaning & Diagnostic Guide
IC Module 4X Reference Circuit, Too Many Pulses
What does P1370 mean?
- BUICK: IC Module 4X Reference Circuit, Too Many Pulses Source
- CADILLAC: IC Module 4X Reference Circuit Too Many Pulses Source
- CHEVY: IC Module 4X Reference Circuit Too Many Pulses Source
- CHRYSLER: IC Module 4X Reference Circuit Too Many Pulses Source
- GM: IC Module 4X Reference Circuit Too Many Pulses Source
- GMC: IC Module 4X Reference Circuit Too Many Pulses Source
- JAGUAR: Insufficient RPM Increase During Spark Test Source
- OLDSMOBILE: IC Module 4X Reference Circuit Too Many Pulses Source
- OTHER: Insufficient RMP Increase During Spark Test Source
- SATURN: IC Module 4X Reference Circuit Too Many Pulses Source
- VOLKSWAGEN: Cylinder 6 Ignition Circuit Open Source
P1370 quick answer
P1370 is a manufacturer-specific diagnostic trouble code, so its meaning depends on the vehicle. Supplied definitions include an ignition-control-module reference circuit reporting too many pulses, insufficient RPM increase during a spark test, and an open cylinder 6 ignition circuit. Check the definition for the exact vehicle before diagnosing.
Is P1370 generic or manufacturer-specific?
P1370 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, GM, GMC and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1370 works in the vehicle
A diagnostic trouble code (DTC) records a condition detected by a vehicle’s control system. In the supplied references, several Buick, Cadillac, Chevrolet, GM, GMC, Oldsmobile, and Saturn entries define P1370 as “IC Module 4X Reference Circuit Too Many Pulses.” Other listed definitions differ. “4X reference” refers to an engine-speed or timing signal used by the ignition-control system; the code alone does not identify a failed part.
P1370 symptoms
Depending on the vehicle and the condition behind the code, there may be an illuminated check-engine light, rough running, misfires, starting difficulty, or reduced performance. Some vehicles may show no obvious symptoms. These are possibilities, not symptoms established by the code evidence.
Possible causes of P1370
Possible causes depend on the vehicle-specific definition and test results. For the reference-circuit definition, signal wiring, connectors, or related ignition-control components may warrant inspection. The other supplied definitions call for different diagnostic paths. P1370 alone does not confirm a failed component.
How to diagnose P1370
- Confirm the vehicle’s year, make, model, engine, and market, then look up the manufacturer-specific definition of P1370.
- Use a compatible scan tool to record the code, any accompanying codes, and available freeze-frame data before clearing anything.
- Follow the service information for that exact vehicle and code definition; inspect relevant wiring and connectors for visible damage or poor connections.
- Have a qualified technician perform any required signal, ignition, or spark-test checks using the vehicle’s specified procedure.
- Recheck for the code after diagnosis and repair, and verify the result using the manufacturer’s prescribed checks.
How to fix P1370
There is no single repair for P1370 across all vehicles. Repair decisions should follow the exact vehicle’s service information and test results; avoid replacing parts based on the code alone. Ignition-system testing can involve hazardous voltage, so leave those checks to a properly equipped technician.
Can I drive with P1370?
The code alone cannot establish whether a vehicle is safe to drive. If the engine runs poorly, stalls, loses power, or the warning light flashes, stop when safe and seek professional advice. If there are no noticeable symptoms, arrange diagnosis promptly and follow the vehicle’s owner’s manual.
P1370 frequently asked questions
What does P1370 mean?
It is manufacturer-specific. Supplied references include an ignition-control reference circuit reporting too many pulses, insufficient RPM increase during a spark test, and an open cylinder 6 ignition circuit.
Does P1370 identify a failed ignition module?
No. The code describes a detected condition, and its meaning varies by vehicle. Testing is needed to determine the cause.
Can I drive with P1370?
The code alone does not determine driveability. Consider the vehicle’s symptoms and owner’s manual, and seek professional help if it runs poorly, stalls, loses power, or the warning light flashes.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.