EV Diagnostics
Verified EV diagnostic knowledge page

Audi B184C00

Run “VKMS adaption” Test Plan 0150 0000 Time stated on the diagnostic protocol (Max 25 TU) Adaptive Cruise Control – DTC C110B54 GFF – Radar sensor replacement test plan 0150 0000

DriveNot yet established by verified evidence.
ChargeNot yet established by verified evidence.
ServiceContact an Audi dealer or qualified Audi service provider for diagnosis using the GFF “VKMS adaption” test plan.
Confidence95%

Quick answer

For a 2022 Audi Q4 e-tron in the U.S., DTC B184C00 is documented in an Audi manufacturer communication as requiring the Guided Fault Finding (GFF) “VKMS adaption” test plan, labor operation 0150 0000. The diagnostic-protocol time is allowed up to 25 TU.

This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.

Video guides

Watch Videos

Relevant videos play here without leaving this diagnostic page.

No sufficiently relevant embeddable video has been accepted for this diagnostic yet.

Videos are supporting material and never override OEM or regulator evidence.

1. What does B184C00 mean?

For a 2022 Audi Q4 e-tron in the U.S., DTC B184C00 is documented in an Audi manufacturer communication as requiring the Guided Fault Finding (GFF) “VKMS adaption” test plan, labor operation 0150 0000. The diagnostic-protocol time is allowed up to 25 TU.

2. Technical explanation

The verified manufacturer communication lists: “Instrument Cluster – DTC B184C00 GFF - Run ‘VKMS adaption’ Test Plan 0150 0000 Time stated on the diagnostic protocol (Max 25 TU).” The supplied evidence does not define VKMS, identify a component failure, or state why this DTC is stored.

3. What system is affected?

Instrument Cluster, as identified in the manufacturer communication.

4. How serious is this code?

Unknown. The supplied verified evidence does not assign a severity.

5. Symptoms you may notice

  • Not yet established by verified evidence.

6. Possible causes

  • Not yet established by verified evidence.

7. Can I still drive the vehicle?

Not yet established by verified evidence.

8. Can I charge the vehicle?

Not yet established by verified evidence.

9. What you can safely do

  • Arrange diagnosis by an Audi-qualified service provider using the specified GFF “VKMS adaption” test plan.
  • Do not assume that this DTC alone identifies a failed part; the supplied evidence specifies a diagnostic test plan rather than a confirmed component replacement.

10. Step-by-step troubleshooting

  1. Use Guided Fault Finding (GFF) to run the “VKMS adaption” test plan under labor operation 0150 0000.
  2. Follow the time stated in the diagnostic protocol; the manufacturer communication lists a maximum of 25 TU.

11. When to contact service

Contact an Audi dealer or qualified Audi service provider for diagnosis using the GFF “VKMS adaption” test plan.

12. What the service center may check

  • Confirm DTC B184C00 in the Instrument Cluster.
  • Run the GFF “VKMS adaption” test plan, labor operation 0150 0000.
  • Document the diagnostic-protocol time, up to the stated maximum of 25 TU.

13. Possible repair or resolution

  • Not yet established by verified evidence. The manufacturer communication specifies running a test plan, but does not provide a verified repair outcome for B184C00.

14. Affected vehicles

15. Related TSBs / service bulletins

  • NHTSA Manufacturer Communication PDF 10218982: A0022602067878_1, published August 30, 2022. It lists Instrument Cluster DTC B184C00 and directs technicians to run the GFF “VKMS adaption” test plan (0150 0000), with diagnostic-protocol time up to 25 TU.
  • Source: https://static.nhtsa.gov/odi/tsbs/2022/MC-10218982-0001.pdf

16. Recall information

  • Not yet established by verified evidence.

17. Official manufacturer information

Verified applicability: 2022 Audi Q4 e-tron, U.S. The supplied official manufacturer communication is available through NHTSA: https://static.nhtsa.gov/odi/tsbs/2022/MC-10218982-0001.pdf

19. Frequently asked questions

What does Audi DTC B184C00 require?

The verified manufacturer communication directs technicians to run the GFF “VKMS adaption” test plan, labor operation 0150 0000, for Instrument Cluster DTC B184C00.

How much diagnostic time is listed for B184C00?

The communication states that time is as shown on the diagnostic protocol, with a maximum of 25 TU.

Does B184C00 prove that a specific component has failed?

No specific failed component is established by the supplied verified evidence.

Is B184C00 confirmed to affect driving or charging?

Not yet established by verified evidence.

20. Sources & verification

Verified
Audi B184C00: Run “VKMS adaption” Test Plan 0150 0000 Time stated on… | EV Diagnostics