BEV model family

Audi RS e-tron GT error codes and diagnostics

Diagnostic coverage for model years 2022–2024. Verified entries below are linked to this model family by source-backed applicability evidence; model membership alone is never used to invent a code relationship.

PowertrainBEV
Model years2022–2024
Verified diagnostics75
Evidence statusVerified

Verified Verified Audi RS e-tron GT diagnostic codes

Showing 1–35 of 75 verified records for this model. Each result opens a manufacturer-specific report with the code meaning, affected vehicles, source evidence and the full diagnostic knowledge page where available.

Antenna MalfunctionFor certain 2023 Audi US models, an “Antenna Malfunction” message can be displayed on the MMI screen. Audi manufacturer communications link this message to a possible communication issue involving the emergency call module and communication unit. · 2023View diagnostic report →Audi adaptive light malfunction“Audi adaptive light malfunction” is an Audi instrument-cluster warning documented in Audi technical service communications. In the verified examples, it can appear with temporarily inoperative driver-assistance systems that become available again after a few seconds. · 2019–2022View diagnostic report →B101C07Verified diagnostic record · 2020–2023View diagnostic report →B107A16Verified diagnostic record · 2019–2022View diagnostic report →B107BF0Audi DTC B107BF0 with symptom 233479/233523 indicates temporary partial system availability caused by environmental influence, such as an external ultrasound signal, a street sweeper, or construction equipment. · 2019–2023View diagnostic report →B10FCF0Audi DTC B10FCF0 is documented as a temporary partial-system availability condition associated with environmental influences, including external ultrasound signals such as those from a street sweeper or construction equipment. · 2019–2023View diagnostic report →B122B13Audi DTC B122B13 is identified in the verified manufacturer communications as “Central locking motors Open circuit.” · 2019–2023View diagnostic report →B126101Verified diagnostic record · 2019–2024View diagnostic report →B126111B126111 indicates a short circuit to ground reported for the windshield washer pump. Audi’s verified bulletin states that a blocked washer pump caused by frozen washer fluid can increase pump resistance and store this DTC; it may be static or sporadic. · 2019–2024View diagnostic report →B126113Audi DTC B126113 means “Windshield washer pump Open circuit.” Verified evidence links it to an inoperative washer system and/or windshield-washer solvent leak, with the DTC stored in the BCM/J519 control module. · 2019–2024View diagnostic report →B126CF0B126CF0 indicates that the Audi navigation database is malfunctioning. Verified Audi service information links it to a navigation map over-the-air update that was interrupted by an internal reset, leaving the database corrupted. · 2021–2022View diagnostic report →B126CF1Audi DTC B126CF1 means “Navigation database not available.” Verified Audi/NHTSA communications associate it with a navigation system that remains initializing or has a corrupt or incomplete map after an over-the-air update. The cited bulletin applies only in combination with recall 91DZ. · 2021–2022View diagnostic report →B13034AVerified diagnostic record · 2023View diagnostic report →B13BCF2Verified diagnostic record · 2016–2023View diagnostic report →B145504Verified diagnostic record · 2016–2023View diagnostic report →B16F8F1B16F8F1 indicates “Rear spoiler drive 1, Blocking when extending.” Verified Audi service-bulletin evidence links this DTC to rear-spoiler operation concerns on certain US-market 2021–2022 Audi A7, e-tron GT, and RS e-tron GT vehicles. · 2021–2022View diagnostic report →B170AF1Audi DTC B170AF1 means “Coding Step 2 not carried out.” Verified Audi communications associate it with the driver assist systems control module J1121 (address 00A5), including after a software update. The specified action is to run the ODIS test plan calculated for B170AF1. · 2021–2022View diagnostic report →B18AC13B18AC13 is an Audi DTC meaning: “Motor for rear spoiler drive 1, Open circuit.” Verified Audi service information identifies a possible loss of contact inside the rear spoiler drive motor that can cause intermittent or permanent rear-spoiler operation loss. · 2021–2022View diagnostic report →B1A9913For affected 2023–2024 US Audi e-tron GT and RS e-tron GT vehicles, DTC B1A9913 may be an erroneous software-related “ghost DTC.” Audi states it has no effect on vehicle functionality and that no repair is available at this time. · 2023–2024View diagnostic report →B200043For verified 2022 US Audi e-tron GT and RS e-tron GT applicability, DTC B200043 means “Control Module Faulty.” Audi’s cited technical service bulletins identify a software bug in the head-up display (HUD) as the technical background when this code is stored in HUD control module J898 (address word 0082). · 2022View diagnostic report →B200096Verified diagnostic record · 2021–2022View diagnostic report →B200FF0Audi DTC B200FF0 means “Internal malfunction.” Verified Audi bulletins show it can be stored either in the suspension control unit J775 or in the instrument cluster J285, depending on the applicable bulletin and vehicle condition. · 2021–2022View diagnostic report →B200FF3Audi DTC B200FF3 is documented as an internal malfunction in several control-module contexts. For the Audi e-tron suspension-control-module case, Audi states that it can result from a timing issue in module memory access; follow the applicable Audi test plan if additional suspension DTCs are present. · 2021–2022View diagnostic report →B200FF9Audi DTC B200FF9 means “internal problem.” Verified Audi/NHTSA communications link it to driver-assistance control modules and, in documented cases, overly sensitive software diagnostics. Applicability is verified for specified 2019–2022 US Audi models, including the e-tron, e-tron GT, and RS e-tron GT. · 2021–2022View diagnostic report →B200FFAFor certain 2019–2022 US Audi models, B200FFA may be stored in the driver assistance systems control module J1121 as an internal malfunction with symptom code 282648 or 282649. Audi’s published service information states that replacing J1121 for the listed DTCs is not effective. · 2019–2022View diagnostic report →B2F0100Verified diagnostic record · 2022–2024View diagnostic report →C12BFF0C12BFF0 indicates that automatic calibration of an Audi radar sensor was not possible. Verified Audi service information says this can occur when the calculated dynamic angle offset exceeds ±5° during continuous calibration while driving above a defined speed threshold. · 2019–2023View diagnostic report →C12D5FAC12D5FA is an Audi driver-assistance-system DTC: “control unit for driver assist systems, picture processor does not respond,” with symptom code 221281. Audi documents it as an intermittent condition linked to an overly sensitive diagnostic function in applicable bulletins. · 2019–2022View diagnostic report →C1399F0Audi DTC C1399F0 indicates that brake application mode is active during a brake-pad/disc break-in process. In the verified Audi material, the DTC is logged in the ABS control module and is automatically deactivated when the required energy amount is reached. · 2022–2023View diagnostic report →Electrical system: fault. Please contact workshopVerified diagnostic record · 2024View diagnostic report →Electrical system: fault. Safely stop vehicleVerified diagnostic record · 2022–2024View diagnostic report →Emergency call function: malfunction! Function unavailable. Please contact serviceThis Audi alert indicates that the emergency call function is unavailable and asks the driver to contact service. Verified manufacturer communications document the same instrument-cluster warning and refer to diagnostic trouble codes stored in the Emergency Call Module and Communication Unit. · 2020–2024View diagnostic report →Engine start system: faultFor covered Audi vehicles, this alert can appear with no functional issues. Audi technical-service communications associate it with a stored Comfort Control Module fault combination and provide a service procedure. Driveability and charging safety are not established by the supplied evidence. · 2023–2024View diagnostic report →Fault: Limited warning messages...Verified diagnostic record · 2019–2023View diagnostic report →Fault: Limited warning messgesVerified diagnostic record · 2019–2025View diagnostic report →

About this model coverage

EV Diagnostics separates vehicle catalog data from diagnostic applicability. A code is listed as verified for Audi RS e-tron GT only when supporting evidence connects that diagnostic identity to the model or its documented model-year range.

Related navigation

All Audi EV models and diagnostics · Search all diagnostic codes · How verification works