EV Diagnostics
Verified EV diagnostic knowledge page

Audi B200096

Ctrl. Module Faulty

DriveNot yet established by verified evidence.
ChargeNot yet established by verified evidence.
ServiceContact an Audi dealer or qualified Audi service provider for ODIS-based diagnosis, particularly if B200096 is accompanied by an SOS malfunction warning or is stored with a relevant symptom code.
Confidence95%

Quick answer

Audi DTC B200096 means “Ctrl. Module Faulty.” Verified Audi service information identifies two specific contexts: an erroneous entry in telematics control module J949 after transport-mode removal, and a hardware-related instrument-cluster issue. The exact meaning depends on the module, symptom code, and vehicle applicability.

This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.

Video guides

Watch Videos

Relevant videos play here without leaving this diagnostic page.

Audi S7 Hybrid Dies Again After 6 Months — Starter/Generator Replacement | U046900 + B2000963D4KAUTO
Audi Q8 defeito bateria 48V, falha código B200096, P0B29OOAuto Impacto Tecnologia Automotiva

Videos are supporting material and never override OEM or regulator evidence.

1. What does B200096 mean?

Audi DTC B200096 means “Ctrl. Module Faulty.” Verified Audi service information identifies two specific contexts: an erroneous entry in telematics control module J949 after transport-mode removal, and a hardware-related instrument-cluster issue. The exact meaning depends on the module, symptom code, and vehicle applicability.

2. Technical explanation

B200096 is a generic Audi wording for a control-module fault, but the supplied official bulletins show it can occur in different modules and conditions. In the telematics control module J949 (address 0075), B200096 with symptom code 131077 may be stored when an SOS malfunction warning is shown in the instrument cluster. Audi states this DTC can be entered erroneously during removal of transport mode. Separately, Audi bulletin A9023982069331_1 identifies B200096 with symptom 10485828 in connection with a hardware-related issue affecting the instrument cluster; the bulletin directs verification of the instrument-cluster production date with ODIS.

3. What system is affected?

Not uniquely established by the DTC alone. Verified bulletin contexts are: telematics control module J949 (address 0075) for B200096 with symptom code 131077, and the instrument cluster for B200096 with symptom 10485828.

4. How serious is this code?

Unknown. The supplied verified evidence does not assign a severity level.

5. Symptoms you may notice

  • An SOS malfunction warning displayed in the instrument cluster is verified for B200096 with symptom code 131077 stored in telematics control module J949.
  • No other symptoms are established by the supplied verified evidence.

6. Possible causes

  • In telematics control module J949, Audi states B200096 with symptom code 131077 can be entered erroneously when transport mode is removed.
  • For the instrument-cluster context with symptom 10485828, Audi states that a hardware-related issue may cause the complaint.
  • No single cause applies to every B200096 occurrence; the control module and symptom code must be identified.

7. Can I still drive the vehicle?

Not yet established by verified evidence.

8. Can I charge the vehicle?

Not yet established by verified evidence.

9. What you can safely do

  • Record all stored diagnostic trouble codes, including their control-module address and symptom code, before arranging diagnosis.
  • If an SOS malfunction warning is displayed, arrange Audi-capable diagnostic evaluation.
  • Do not attempt control-module, telematics, instrument-cluster, or high-voltage repairs yourself.

10. Step-by-step troubleshooting

  1. Use Audi ODIS or equivalent qualified diagnostic service to identify the module that stored B200096 and its associated symptom code.
  2. For J949/address 0075 with B200096 and symptom code 131077, consult the applicable Audi bulletin for the transport-mode-removal scenario and current ODIS-guided service.
  3. For the instrument-cluster context with symptom 10485828, Audi directs checking the instrument-cluster production date using ODIS: Self-diagnosis, address 0017 Instrument cluster, then Identification.
  4. No further troubleshooting steps are established by the supplied evidence.

11. When to contact service

Contact an Audi dealer or qualified Audi service provider for ODIS-based diagnosis, particularly if B200096 is accompanied by an SOS malfunction warning or is stored with a relevant symptom code.

12. What the service center may check

  • Identify whether B200096 is stored in telematics control module J949/address 0075 or in the instrument cluster/address 0017.
  • Confirm the associated symptom code: 131077 is documented for the J949 transport-mode-removal bulletin; 10485828 is documented for the instrument-cluster hardware-related bulletin.
  • For the J949 scenario, ensure the current ODIS version is used; an earlier bulletin specifies a minimum ODIS version of 5.2.6 with GFF 2.20.
  • For the instrument-cluster scenario, check the instrument-cluster production date through ODIS.

13. Possible repair or resolution

  • For J949 B200096 with symptom code 131077, Audi’s documented service path is ODIS-guided service for a DTC that may have been entered erroneously after transport-mode removal.
  • For the instrument-cluster B200096 with symptom 10485828, the verified bulletin indicates an optimized manufacturing process and directs production-date verification; the supplied evidence does not establish a universal repair outcome.
  • Any repair decision must follow the applicable Audi bulletin and ODIS diagnostic results.

14. Affected vehicles

15. Related TSBs / service bulletins

  • Audi/NHTSA manufacturer communication A9122492059528_7, published November 17, 2022: B200096 with symptom 131077 in telematics control module J949 may be entered erroneously during transport-mode removal and may accompany an SOS malfunction warning.
  • Audi/NHTSA manufacturer communication A9023982069331_1, published January 31, 2023: B200096 with symptom 10485828 is associated with an instrument-cluster hardware-related issue; the bulletin directs an ODIS production-date check.
  • Earlier revisions of the J949 bulletin were published through NHTSA as MC-10222101, MC-10208493, MC-10207152, MC-10199216, and MC-10182070.

16. Recall information

  • Not yet established by verified evidence. The supplied records are manufacturer communications/service bulletins, not recall records.

17. Official manufacturer information

Verified official sources are NHTSA-hosted Audi manufacturer communications. Applicability records supplied for the US include Audi A7, A8, Q5, RS e-tron GT, e-tron, and e-tron GT across listed model years from 2019 through 2023; individual bulletin applicability must be confirmed by VIN and the exact module/symptom-code context.

19. Frequently asked questions

What does Audi B200096 mean?

The verified canonical meaning is “Ctrl. Module Faulty.” The supplied evidence shows that the precise diagnostic interpretation depends on which control module stores the code and its symptom code.

Can B200096 be a false or erroneous fault?

Yes, in the verified telematics control module J949 scenario, B200096 with symptom code 131077 can be entered erroneously when transport mode is removed.

Does B200096 mean the instrument cluster is faulty?

Not in every case. One verified Audi bulletin links B200096 with symptom 10485828 to a hardware-related instrument-cluster issue, while another links B200096 with symptom 131077 to the telematics control module J949.

Is B200096 related to an SOS malfunction warning?

It can be. Audi documents an SOS malfunction warning in the instrument cluster when B200096 with symptom code 131077 is stored in telematics control module J949.

20. Sources & verification

Verified
Audi B200096: Ctrl. Module Faulty | EV Diagnostics