BYD P1ACC07
P1ACC07 is a BYD diagnostic trouble code meaning: “DC charging negative contactor sintered.” Verified applicability is BYD ATTO 3 model years 2022–2026, Global region.
Evidence snapshot
Last evidence review: 2026-09-25. Applicability is shown only where a model relationship is supported by evidence.
Quick answer
P1ACC07 is a BYD diagnostic trouble code meaning: “DC charging negative contactor sintered.” Verified applicability is BYD ATTO 3 model years 2022–2026, Global region.
This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.
Watch Videos
Relevant videos play here without leaving this diagnostic page.
No sufficiently relevant embeddable video has been accepted for this diagnostic yet.
Videos are supporting material and never override OEM or regulator evidence.
1. What does BYD P1ACC07 mean?
P1ACC07 is a BYD diagnostic trouble code meaning: “DC charging negative contactor sintered.” Verified applicability is BYD ATTO 3 model years 2022–2026, Global region.
2. Technical explanation
The verified diagnostic evidence identifies P1ACC07 as a DTC in the DC charging system. Its documented meaning is “DC charging negative contactor sintered.” No further operating logic, failure mechanism, or component-level repair procedure is established by the supplied evidence.
3. What system is affected?
DC charging
4. How serious is this code?
Unknown. Severity is not yet established by verified evidence.
5. BYD P1ACC07 symptoms you may notice
- Not yet established by verified evidence.
6. Possible causes of BYD P1ACC07
- The verified code meaning identifies a DC charging negative contactor as involved. The underlying cause is not yet established by verified evidence.
7. Can I drive with BYD P1ACC07?
Unknown. Whether the vehicle can be driven is not yet established by verified evidence.
8. Can I charge with BYD P1ACC07?
Unknown. Whether charging can continue is not yet established by verified evidence.
9. What you can safely do
- Do not attempt high-voltage contactor diagnosis, disassembly, or repair.
- Arrange professional diagnosis if the code is present.
10. How to troubleshoot BYD P1ACC07
- Confirm the stored DTC using suitable diagnostic equipment.
- Have a qualified BYD service provider diagnose the DC charging system. Further diagnostic steps are not yet established by verified evidence.
11. When to contact service
Professional service is recommended because this DTC concerns the DC charging system and a contactor. The supplied evidence does not establish urgency or drivability.
12. What the service center may check
- Read and confirm P1ACC07 with diagnostic equipment.
- Diagnose the DC charging negative contactor and associated system according to applicable BYD service information. Specific test procedures are not yet established by verified evidence.
13. Possible repair or resolution for BYD P1ACC07
- Not yet established by verified evidence.
14. Affected vehicles
- BYD ATTO 3 · 2022–2026 · GLOBAL
15. Related TSBs / service bulletins
- No technical service bulletin information was supplied in the verified evidence.
16. Recall information
- No recall information was supplied in the verified evidence.
17. Official manufacturer information
Verified source coverage for this diagnostic is listed below. Open the cited document for the full manufacturer or regulator context.
- OBDTotal technical manual index: BYD ATTO 3 diagnostic evidence · technical_manual
19. BYD P1ACC07 frequently asked questions
What does BYD code P1ACC07 mean?
It means “DC charging negative contactor sintered.”
Which vehicles are verified to use P1ACC07?
BYD ATTO 3 vehicles from model years 2022 through 2026 in the Global region.
Can I drive with P1ACC07?
Not yet established by verified evidence.
Can I charge with P1ACC07?
Not yet established by verified evidence.
20. Sources & verification
Evidence sources: 1 · Page reviewed 2026-09-25 · Editorial & quality policy