PHEV model family

Hyundai Santa Fe error codes and diagnostics

Diagnostic coverage for model years 2022–2023. Verified entries below are linked to this model family by source-backed applicability evidence; model membership alone is never used to invent a code relationship.

PowertrainPHEV
Model years2022–2023
Verified diagnostics19
Evidence statusVerified

Verified Verified Hyundai Santa Fe diagnostic codes

Showing 1–19 of 19 verified records for this model. Each result opens a manufacturer-specific report with the code meaning, affected vehicles, source evidence and the full diagnostic knowledge page where available.

C1312Verified diagnostic record · 2022–2023View diagnostic report →C1313Verified diagnostic record · 2022–2023View diagnostic report →C1314For 2022–2023 Hyundai Santa Fe vehicles in the US, DTC C1314 is identified as a left-rear TPMS sensor RF-channel failure. Hyundai/NHTSA bulletin 23-BE-001H directs inspection using the TPMS Reception Rate procedure. · 2022–2023View diagnostic report →C1315C1315 is identified in the verified Hyundai/NHTSA bulletin as a right-rear TPMS sensor RF-channel failure. The supplied evidence applies to 2022–2023 Hyundai Santa Fe vehicles in the U.S.; the bulletin specifically concerns Santa Fe Plug-In Hybrid vehicles equipped with Surround View Monitoring (SVM). · 2022–2023View diagnostic report →P193B79P193B79 is listed by Hyundai/NHTSA material as an HP EOP low hydraulic-pressure DTC. The supplied evidence does not establish severity, whether the vehicle is safe to drive, charging impact, or a specific repair for this code. · 2022View diagnostic report →P193D13P193D13 is identified in Hyundai service information as “HF EOP System Fault – Open circuit.” Verified applicability is limited to 2022 Hyundai Kona and 2022 Hyundai Santa Fe in the US. The supplied evidence does not establish driveability, charging safety, urgency, symptoms, or a specific repair. · 2022View diagnostic report →P193D19P193D19 is identified in Hyundai service bulletin 22-AT-009H as “HF EOP System Fault - Over current.” The bulletin instructs technicians to inspect the wiring harness and, if no harness issue is found, replace the HF EOP. · 2022View diagnostic report →P193D1DP193D1D is identified in Hyundai service communication 22-AT-009H as “HF EOP System Fault - Current sensor failure.” It is verified as applicable to certain 2022 US Hyundai Santa Fe vehicles. Driveability, charging safety, and urgency are not yet established by verified evidence. · 2022View diagnostic report →P193D29P193D29 is identified in Hyundai service information as an HF EOP system fault: Hall sensor failure. The same bulletin also lists CAN-related DTCs that may occur with this condition. Refer to the related shop manual for diagnosis; if no wiring-harness issue is found, the bulletin directs replacement of the DCT. · 2022View diagnostic report →P193D4BP193D4B is a Hyundai HF EOP system fault identified as “Over temperature.” Hyundai’s official service communication directs technicians to diagnose the related shop-manual procedure, inspect for wiring-harness issues, and replace the HF EOP if no harness issue is found. · 2022View diagnostic report →P193D96P193D96 is identified by Hyundai as an HF EOP System Fault—Internal fault. Hyundai’s bulletin groups it with several HF EOP-related faults and specifies replacement of the HF EOP for the listed DTCs. · 2022View diagnostic report →P193E71P193E71 is identified in Hyundai bulletin 22-AT-009H as “HF EOP Performance – EOP stuck.” The bulletin directs replacement of the HF EOP when this DTC is found. · 2022View diagnostic report →P1C2D03P1C2D03 is identified in Hyundai bulletin 22-AT-009H as an HP EOP motor position sensor range DTC. The supplied evidence applies it to certain U.S. 2022 Hyundai Kona and Santa Fe vehicles. · 2022View diagnostic report →P1C2D1CP1C2D1C is listed by Hyundai as “HP EOP motor position sensor voltage.” It is covered in Hyundai communication 22-AT-009H for specified U.S. models. Follow the applicable service manual diagnosis; the bulletin states that if no wiring-harness issue is found, replace the DCT. · 2022View diagnostic report →P1C2E4BP1C2E4B is identified in Hyundai service communication 22-AT-009H as “HP EOP motor control current.” The supplied evidence applies to certain U.S. 2022 Hyundai Kona and Santa Fe vehicles, but does not establish exact engine/trim applicability for those two entries. · 2022View diagnostic report →P1C2E92P1C2E92 is identified in Hyundai bulletin 22-AT-009H as “HP EOP motor control temperature.” · 2022View diagnostic report →U004688U004688 is listed by Hyundai as an HP EOP-related diagnostic code. The verified instruction is to use the related shop manual for diagnosis; if no wiring-harness issue is found, replace the DCT. · 2022View diagnostic report →U111788U111788 is listed by Hyundai as a High Pressure EOP (HP EOP) diagnostic trouble code. The verified Hyundai service communication directs technicians to the related shop manual and states that, if no wiring-harness issue is found, the DCT should be replaced. · 2022View diagnostic report →U113508Verified diagnostic record · 2022View diagnostic report →

About this model coverage

EV Diagnostics separates vehicle catalog data from diagnostic applicability. A code is listed as verified for Hyundai Santa Fe only when supporting evidence connects that diagnostic identity to the model or its documented model-year range.

Related navigation

All Hyundai EV models and diagnostics · Search all diagnostic codes · How verification works