Source-backed diagnostic reference

C1163 Code: Meaning & Diagnostic Guide

Park Brake Switch # 2 Applied Circuit Short to Gnd

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does C1163 mean?

  • OTHER: Park Brake Switch # 2 Applied Circuit Short to Gnd Source

C1163 quick answer

C1163 is listed as “Park Brake Switch #2 Applied Circuit Short to Gnd.” It indicates a detected short-to-ground condition in the circuit associated with the second park brake switch; it does not by itself confirm which part has failed.

Is C1163 generic or manufacturer-specific?

C1163 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How C1163 works in the vehicle

A short to ground means the circuit may be making an unintended electrical connection to ground. “Switch #2 Applied Circuit” describes the circuit monitored for the park brake switch’s applied state. The exact circuit layout and diagnostic procedure can vary by vehicle.

C1163 symptoms

Depending on the vehicle, this code may be associated with a park-brake warning, an unexpected park-brake status indication, or other brake-related warnings. A stored code may also occur without an obvious symptom.

Possible causes of C1163

Possibilities include damaged wiring, a poor or contaminated connector, a switch fault, or a problem elsewhere in the monitored circuit. The code alone does not establish the cause or confirm that the switch has failed.

How to diagnose C1163

  1. Confirm the code with a suitable scan tool and note any related codes and warning messages.
  2. Use vehicle-specific service information to identify the circuit and the applicable test procedure.
  3. Check the relevant wiring and connectors for visible damage, corrosion, looseness, or signs of a short.
  4. Have a qualified technician test the circuit and switch according to the vehicle’s service information before replacing parts.

How to fix C1163

Repair should be based on test results. A technician may need to address wiring or connector damage, or replace a confirmed faulty component. Clear the code only after repairs and verify whether it returns. Avoid replacing the switch based on C1163 alone.

Can I drive with C1163?

The code alone cannot determine whether the vehicle is safe to drive. If brake or park-brake warnings are present, braking behavior changes, or the park brake does not release or hold as expected, stop in a safe place and seek qualified assistance. Follow the vehicle’s owner’s manual.

C1163 frequently asked questions

What does code C1163 mean?

It is listed as a short-to-ground condition in the Park Brake Switch #2 Applied Circuit.

Does C1163 mean the park brake switch is bad?

No. Wiring, connectors, or another part of the monitored circuit may be involved. Testing is needed to identify the cause.

Can I clear C1163 without making a repair?

A scan tool may clear the stored code, but clearing it does not fix the underlying condition. Check whether it returns after the circuit is diagnosed.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.