PHEV model family
Audi A8 error codes and diagnostics
Diagnostic coverage for model years 2021. Verified entries below are linked to this model family by source-backed applicability evidence; model membership alone is never used to invent a code relationship.
PowertrainPHEV
Model years2021
Verified diagnostics109
Evidence statusVerified
Verified Verified Audi A8 diagnostic codes
Showing 1–35 of 109 verified records for this model. Each result opens a manufacturer-specific report with the code meaning, affected vehicles, source evidence and the full diagnostic knowledge page where available.
Adaptive driving assist: limited availability, see ownerFor applicable 2019–2021 US Audi A8 and e-tron vehicles, this alert can appear when dirt restricts the laser scanner’s detection capability. Certain driver-assistance features might then be unavailable. · 2019–2021View diagnostic report →Air suspension: system faultAudi OEM alert: “Air suspension: system fault.” Verified Audi technical-service communications link this instrument-cluster message to faults recorded in the suspension control unit J775 (diagnostic address 0074) on specified US-market vehicles. · 2019–2025View diagnostic report →Audi Active Lane Assist: malfunction!Verified diagnostic record · 2019–2022View diagnostic report →Audi adaptive light malfunction“Audi adaptive light malfunction” is an Audi instrument-cluster warning documented in Audi technical service communications. In the verified examples, it can appear with temporarily inoperative driver-assistance systems that become available again after a few seconds. · 2019–2022View diagnostic report →Audi pre sense: Malfunction! Please contact service.For certain 2020–2021 US Audi A7, A8, and e-tron vehicles, this message is documented in Audi service communications in connection with a sporadic intersection/lane-changing assist failure. Contact Audi service for diagnosis. · 2020–2021View diagnostic report →Audi pre sense: fault. Please contact service.Verified diagnostic record · 2020–2021View diagnostic report →Audi pre sense: fault. Please contact workshop.This Audi alert is verified in an official NHTSA-posted Audi manufacturer communication for certain 2020–2023 US Audi A7, A8, and e-tron vehicles. The communication associates the message with inoperative intersection/lane-change assistance functions and a possible radar-sensor calibration fault. · 2020–2023View diagnostic report →B101C07Verified diagnostic record · 2019–2020View diagnostic report →B107A16Verified diagnostic record · 2019–2020View diagnostic report →B107B13B107B13 is documented by Audi/NHTSA manufacturer communications as “Rear parking aid sensor Open circuit.” For a 2022 US Audi Q3, the verified bulletin evidence associates this code with a rear parking-distance-control (PDC) sensor connector that is not fully seated. · 2021–2022View diagnostic report →B107BF0Audi DTC B107BF0 with symptom 233479/233523 indicates temporary partial system availability caused by environmental influence, such as an external ultrasound signal, a street sweeper, or construction equipment. · 2019–2021View diagnostic report →B10FCF0Audi DTC B10FCF0 is documented as a temporary partial-system availability condition associated with environmental influences, including external ultrasound signals such as those from a street sweeper or construction equipment. · 2019–2023View diagnostic report →B11E101For certain 2019–2020 US Audi A8 and e-tron vehicles, DTC B11E101 relates to the night vision system video line. Audi states that instrument-cluster tolerances can incorrectly detect a wiring fault when the relevant wiring has been checked and found good. · 2019–2020View diagnostic report →B11E201For certain 2019–2020 Audi A8 and e-tron vehicles in the US, DTC B11E201 means “Video line 2 for night vision system.” Audi documentation says instrument-cluster tolerances can cause an erroneous wiring-problem detection. · 2019–2020View diagnostic report →B122B13Audi DTC B122B13 is identified in the verified manufacturer communications as “Central locking motors Open circuit.” · 2020–2022View diagnostic report →B126101Verified diagnostic record · 2019–2024View diagnostic report →B126111B126111 indicates a short circuit to ground reported for the windshield washer pump. Audi’s verified bulletin states that a blocked washer pump caused by frozen washer fluid can increase pump resistance and store this DTC; it may be static or sporadic. · 2019–2024View diagnostic report →B126113Audi DTC B126113 means “Windshield washer pump Open circuit.” Verified evidence links it to an inoperative washer system and/or windshield-washer solvent leak, with the DTC stored in the BCM/J519 control module. · 2019–2024View diagnostic report →B126CF0B126CF0 indicates that the Audi navigation database is malfunctioning. Verified Audi service information links it to a navigation map over-the-air update that was interrupted by an internal reset, leaving the database corrupted. · 2021–2022View diagnostic report →B126CF1Audi DTC B126CF1 means “Navigation database not available.” Verified Audi/NHTSA communications associate it with a navigation system that remains initializing or has a corrupt or incomplete map after an over-the-air update. The cited bulletin applies only in combination with recall 91DZ. · 2021–2022View diagnostic report →B127C04Audi DTC B127C04 is listed in an official Audi/NHTSA manufacturer communication for the front overhead-view camera. The supplied evidence does not establish the complete diagnostic meaning beyond the truncated title/meaning, “Replacing the c.” · 2019–2022View diagnostic report →B127C4BAudi DTC B127C4B is documented in an official Audi communication as a fault associated with the front overhead-view camera. The supplied evidence also states: “Replacing the control module fo” (text is truncated in the verified record). · 2019–2022View diagnostic report →B127D04Verified diagnostic record · 2019–2022View diagnostic report →B127D4BAudi DTC B127D4B is identified as “Replacing the control module for driver assistance systems (J1121) for the above.” Verified evidence links it to the left overhead-view camera diagnostic group in a 2020 Audi manufacturer communication. · 2019–2022View diagnostic report →B127E04For Audi A7, A8, and e-tron vehicles (2019–2022, US), DTC B127E04 is listed in an Audi manufacturer communication in connection with the left overhead-view camera. The communication states that replacing the driver-assistance systems control module (J1121) is not effective for the listed DTCs. · 2019–2022View diagnostic report →B127E4BFor Audi A7, A8, and e-tron vehicles (model years 2019–2022, US), DTC B127E4B is listed in an official Audi/NHTSA manufacturer communication for the right overhead-view camera. The communication specifically states that replacing the driver-assistance systems control module (J1121) is not effective for the listed DTCs. · 2019–2022View diagnostic report →B127F04Audi DTC B127F04 is listed in an official Audi/NHTSA manufacturer communication for affected 2019–2022 US A7, A8, and e-tron vehicles. The communication states that replacing the driver-assistance control module J1121 is not effective for the referenced DTCs. · 2019–2022View diagnostic report →B127F4BAudi DTC B127F4B is listed in an official Audi/NHTSA manufacturer communication concerning the right overhead-view camera. The communication states that replacing the driver-assistance systems control module J1121 is not effective for this DTC group. · 2019–2022View diagnostic report →B129B11Verified diagnostic record · 2021View diagnostic report →B129C11Verified diagnostic record · 2021View diagnostic report →B13BCF2Verified diagnostic record · 2019–2020View diagnostic report →B145504Verified diagnostic record · 2016–2023View diagnostic report →B14BF01For covered Audi vehicles, DTC B14BF01 is documented in Audi service communications as a steering-column vertical-adjustment motor electrical error, with symptom code 66145. The documented correction is a software update followed by clearing the control unit. · 2019–2021View diagnostic report →B153813For certain 2020–2021 US Audi A7, A8, and e-tron vehicles, DTC B153813 means “steering wheel heater Open circuit.” Audi’s cited manufacturer communication says not to perform repairs for this concern; repairs may be denied. · 2020–2021View diagnostic report →B157629Audi DTC B157629 means: Hall sensor 2 for the roof blind motor has an implausible signal. Verified applicability is 2020–2021 Audi A8 models in the US. · 2020–2021View diagnostic report →
About this model coverage
EV Diagnostics separates vehicle catalog data from diagnostic applicability. A code is listed as verified for Audi A8 only when supporting evidence connects that diagnostic identity to the model or its documented model-year range.
Related navigation
All Audi EV models and diagnostics · Search all diagnostic codes · How verification works