Verified EV diagnostic knowledge page

Audi P060600

For certain 2022–2023 Audi Q4 e-tron vehicles in the US, DTC P060600 has been documented with a startup software communication-timing issue in Electric drive 2 (DMC2), J944. Audi’s bulletin describes an instrument-cluster message: “Electrical system malfunction! Please contact Service,” with normal operation after a key/ignition cycle.

DriveNot yet established by verified evidence.
ChargeNot yet established by verified evidence.
ServiceAudi service contact is indicated by the documented instrument-cluster message: “Electrical system malfunction! Please contact Service.”
Confidence95%

Evidence snapshot

Verified sources2
Affected models1
Model years2022–2023
TSB / bulletin sources2

Last evidence review: 2026-09-24. Applicability is shown only where a model relationship is supported by evidence.

Quick answer

For certain 2022–2023 Audi Q4 e-tron vehicles in the US, DTC P060600 has been documented with a startup software communication-timing issue in Electric drive 2 (DMC2), J944. Audi’s bulletin describes an instrument-cluster message: “Electrical system malfunction! Please contact Service,” with normal operation after a key/ignition cycle.

This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.

Video guides

Watch Videos

Relevant videos play here without leaving this diagnostic page.

No sufficiently relevant embeddable video has been accepted for this diagnostic yet.

Videos are supporting material and never override OEM or regulator evidence.

1. What does Audi P060600 mean?

For certain 2022–2023 Audi Q4 e-tron vehicles in the US, DTC P060600 has been documented with a startup software communication-timing issue in Electric drive 2 (DMC2), J944. Audi’s bulletin describes an instrument-cluster message: “Electrical system malfunction! Please contact Service,” with normal operation after a key/ignition cycle.

2. Technical explanation

Verified Audi/NHTSA bulletin evidence identifies P060600 as “ECM/PCM Processor” when stored in Electric drive 2 (DMC2), J944, address word 00CE. The same bulletin lists P0A1B00, “Drive Motor ‘A’ Control Module,” and attributes the condition to a software communication timing error on start-up. The bulletin’s confirmation criteria include the warning appearing at vehicle start-up and normal vehicle operation after an ignition cycle.

3. What system is affected?

Electric drive 2 (DMC2), J944, address word 00CE. The diagnostic label for P060600 is “ECM/PCM Processor.”

4. How serious is this code?

Not yet established by verified evidence.

5. Audi P060600 symptoms you may notice

  • Instrument-cluster message: “Electrical system malfunction! Please contact Service.”
  • The warning is displayed on vehicle start-up.
  • After a key/ignition cycle, the vehicle operates normally.

6. Possible causes of Audi P060600

  • Audi identifies a software communication timing error on start-up.

7. Can I drive with Audi P060600?

Not yet established by verified evidence.

8. Can I charge with Audi P060600?

Not yet established by verified evidence.

9. What you can safely do

  • If the instrument-cluster message is displayed, contact Audi service as directed by the message.
  • Record whether the warning occurs at startup and whether it clears after a key/ignition cycle.
  • Do not attempt high-voltage or drive-control-module repairs.

10. How to troubleshoot Audi P060600

  1. Audi’s documented confirmation points are: verify that the warning is displayed at vehicle start-up and that the vehicle operates normally after an ignition cycle.
  2. Have a qualified Audi service facility check Electric drive 2 (DMC2), J944, address word 00CE, for DTC P060600 and P0A1B00.

11. When to contact service

Audi service contact is indicated by the documented instrument-cluster message: “Electrical system malfunction! Please contact Service.”

12. What the service center may check

  • Confirm whether the warning appears on vehicle startup.
  • Confirm whether normal operation returns after an ignition cycle.
  • Check Electric drive 2 (DMC2), J944, address word 00CE, for P060600 and P0A1B00.

13. Possible repair or resolution for Audi P060600

  • Not yet established by verified evidence.

14. Affected vehicles

15. Related TSBs / service bulletins

  • Audi Technical Service Bulletin / NHTSA Manufacturer Communication 10228775, document A9322932068370_2, published December 16, 2022: documents P060600 and P0A1B00 in Electric drive 2 (DMC2), J944, with a startup software communication timing error.
  • Audi Technical Service Bulletin / NHTSA Manufacturer Communication 10227025, document A9322842068370_1, published November 7, 2022: documents the same DTCs and startup software communication timing error.
  • Production solution: Not applicable, according to the supplied bulletin evidence.

16. Recall information

  • Not yet established by verified evidence.

17. Official manufacturer information

Verified source coverage for this diagnostic is listed below. Open the cited document for the full manufacturer or regulator context.

19. Audi P060600 frequently asked questions

What does P060600 mean in the documented Audi case?

It is listed as “ECM/PCM Processor” in Electric drive 2 (DMC2), J944, address word 00CE.

What condition does Audi identify?

A software communication timing error on start-up.

Does the vehicle operate normally afterward?

The bulletin states that after a key/ignition cycle, the vehicle operates normally.

Can the vehicle be driven or charged with this code?

Not yet established by verified evidence.

20. Sources & verification

Verified

Evidence sources: 2 · Page reviewed 2026-09-24 · Editorial & quality policy