BEV model family
Audi e-tron error codes and diagnostics
Diagnostic coverage for model years 2021–2023. Verified entries below are linked to this model family by source-backed applicability evidence; model membership alone is never used to invent a code relationship.
PowertrainBEV
Model years2021–2023
Verified diagnostics174
Evidence statusVerified
Verified Verified Audi e-tron diagnostic codes
Showing 36–70 of 174 verified records for this model. Each result opens a manufacturer-specific report with the code meaning, affected vehicles, source evidence and the full diagnostic knowledge page where available.
B13BCF2Verified diagnostic record · 2016–2022View diagnostic report →B145504Verified diagnostic record · 2019View diagnostic report →B14BF01For covered Audi vehicles, DTC B14BF01 is documented in Audi service communications as a steering-column vertical-adjustment motor electrical error, with symptom code 66145. The documented correction is a software update followed by clearing the control unit. · 2019–2021View diagnostic report →B14FF29For applicable 2019–2020 US Audi e-tron vehicles, B14FF29 is identified in Audi manufacturer communications as “Motor for child lock, implausible signal.” Audi states that the software needs to be updated. · 2019–2020View diagnostic report →B153813For certain 2020–2021 US Audi A7, A8, and e-tron vehicles, DTC B153813 means “steering wheel heater Open circuit.” Audi’s cited manufacturer communication says not to perform repairs for this concern; repairs may be denied. · 2020–2021View diagnostic report →B16D431For certain 2020–2021 Audi e-tron vehicles in the US, DTC B16D431 identifies “Left tail lamp 1, no signal/open circuit.” Audi’s published service information attributes this condition to tail-lamp diagnostic software that is too sensitive and states that updated software is available. · 2020–2021View diagnostic report →B16D4F4Audi DTC B16D4F4 means “left tail lamp 1 Turn signal light defective.” For certain US Audi A8 and e-tron vehicles, Audi technical bulletins describe a warning message even though the turn signals remain functional; the documented technical background is a timing issue in tail-lamp software. · 2019–2020View diagnostic report →B16D531For applicable 2020–2021 US Audi e-tron vehicles, DTC B16D531 means “Left tail lamp 2, no signal/open circuit.” Audi’s published service information identifies overly sensitive tail-lamp diagnostic software as the technical background and states that updated tail-lamp software is available. · 2020–2021View diagnostic report →B16D5F1B16D5F1 indicates: “Tail light cluster, left 2, LED faulty.” Verified applicability is the 2019 Audi e-tron (US). · 2019View diagnostic report →B16D5F2Audi DTC B16D5F2 means “Left rear tail lamp 2 Tail lamp fault.” Verified Audi service information associates it with a trunk-lid taillight LED strip that may flicker or may remain partly illuminated after the ignition is switched off. · 2019View diagnostic report →B16D5F4Verified diagnostic record · 2019–2020View diagnostic report →B16D5F6DTC B16D5F6 means “Tail light cluster, left 2, number plate light faulty.” Verified applicability is limited to the 2019 Audi e-tron in the US. · 2019View diagnostic report →B16D631For certain 2020–2021 Audi e-tron vehicles in the US, DTC B16D631 means “Right tail lamp 1, no signal/open circuit.” Audi documented that tail-lamp diagnostic software sensitivity can store this code and cause rapid instrument-cluster turn-signal flashing. Updated tail-lamp software is available. · 2020–2021View diagnostic report →B16D6F4For applicable 2019–2020 US Audi e-tron vehicles, DTC B16D6F4 means “Right tail lamp 1 Turn signal light defective.” Audi technical communications document that a tail-lamp software timing issue can set this code while the turn signals remain functional. · 2019–2020View diagnostic report →B16D731B16D731 means “Right tail lamp 2, no signal/open circuit.” Verified Audi/NHTSA evidence identifies overly sensitive tail-lamp diagnostic software as the technical background for this DTC in the covered vehicles. · 2020–2021View diagnostic report →B16D7F1Audi DTC B16D7F1 means: “Tail light cluster, right 2, LED faulty.” Verified evidence identifies it as a rear-lighting fault for the 2019 Audi e-tron in the US. · 2019View diagnostic report →B16D7F2B16D7F2 is an Audi DTC meaning: “Right rear tail lamp 2 Tail lamp faulty.” Verified evidence identifies it in the comfort system central control module J393 (address word 0046). · 2019View diagnostic report →B16D7F4For applicable 2019–2020 US Audi e-tron vehicles, DTC B16D7F4 means “Right tail lamp 2 Turn signal light defective.” Audi documentation states that the turn signals remain functional and identifies a timing issue in tail-lamp software as the technical background. · 2019–2020View diagnostic report →B16D7F6For a 2019 Audi e-tron in the US, DTC B16D7F6 means: “Tail light cluster, right 2, number plate light faulty.” · 2019View diagnostic report →B16DF52For a 2019 US Audi e-tron, DTC B16DF52 is documented in Audi TSB 91 20 42 as occurring with a trunk-lid taillight that does not work or flickers. The supplied evidence does not establish driving or charging safety status. · 2019View diagnostic report →B170AF1Audi DTC B170AF1 means “Coding Step 2 not carried out.” Verified Audi communications associate it with the driver assist systems control module J1121 (address 00A5), including after a software update. The specified action is to run the ODIS test plan calculated for B170AF1. · 2021–2022View diagnostic report →B191CF8B191CF8 is an Audi DTC meaning “Charge door communication malfunction.” Verified evidence links it to interrupted communication between certain DC chargers and the vehicle. · 2020–2021View diagnostic report →B194B13For 2021–2022 US Audi e-tron vehicles, DTC B194B13 may be stored in the high-voltage battery charger control module J1050 (address 00C6) with symptom code 3211295. The verified NHTSA manufacturer communication states it may be found during PDI or other diagnostic work with no customer concerns. · 2021–2022View diagnostic report →B1A8604B1A8604 means “Function button charge door 1 faulty.” Verified Audi communications associate it with a defective charging-flap function button and, in some cases, a charging flap that cannot be opened. · 2020–2021View diagnostic report →B1A8704Audi DTC B1A8704 means “Function button charge door 2 faulty.” Verified Audi manufacturer communications list it for certain US-market 2020–2021 Audi e-tron vehicles. · 2020–2021View diagnostic report →B1A8AF0For 2021–2022 Audi e-tron Sportback vehicles in the US, B1A8AF0 may be stored in the high-voltage battery charger control module (J1050, address 00C6). Audi’s referenced communication states it can be found during PDI or other diagnostic work with no customer concerns reported. · 2021–2022View diagnostic report →B200000Audi DTC B200000 means “Ctrl. Module Faulty.” For the verified 2021 US Audi A7, A8, Q5, and e-tron applications, Audi documentation identifies it in telematics control module J949 (address 0075) with symptom code 131096. Audi states it can be stored erroneously when transport mode is removed. · 2021View diagnostic report →B200042Verified diagnostic record · 2019–2020View diagnostic report →B200047Audi DTC B200047 means “control unit faulty.” Verified Audi bulletins show that, in specific applications, it can be caused by diagnostic/software behavior rather than a failed module. The exact affected system depends on the stored symptom code and control-module address. · 2019–2020View diagnostic report →B200049Verified diagnostic record · 2019–2022View diagnostic report →B200087For the verified Audi applications, B200087 is a static software-compatibility DTC stored in Information Electronics Control Module 1 (J794, address 005F). Audi’s bulletin states it results from an unintentional data lookup that returns no result, cannot be deleted, and does not restrict functionality. · 2019–2020View diagnostic report →B200096Verified diagnostic record · 2019–2023View diagnostic report →B200FF0Audi DTC B200FF0 means “Internal malfunction.” Verified Audi bulletins show it can be stored either in the suspension control unit J775 or in the instrument cluster J285, depending on the applicable bulletin and vehicle condition. · 2021–2022View diagnostic report →B200FF1For certain 2019–2023 US Audi A7, A8, Q5, and e-tron vehicles, DTC B200FF1 is documented by Audi as an “Internal malfunction” in the suspension control unit J775 (address 0074). · 2019–2023View diagnostic report →B200FF3Audi DTC B200FF3 is documented as an internal malfunction in several control-module contexts. For the Audi e-tron suspension-control-module case, Audi states that it can result from a timing issue in module memory access; follow the applicable Audi test plan if additional suspension DTCs are present. · 2019–2021View diagnostic report →
About this model coverage
EV Diagnostics separates vehicle catalog data from diagnostic applicability. A code is listed as verified for Audi e-tron only when supporting evidence connects that diagnostic identity to the model or its documented model-year range.
Related navigation
All Audi EV models and diagnostics · Search all diagnostic codes · How verification works