BEV model family

Audi e-tron error codes and diagnostics

Diagnostic coverage for model years 2021–2023. Verified entries below are linked to this model family by source-backed applicability evidence; model membership alone is never used to invent a code relationship.

PowertrainBEV
Model years2021–2023
Verified diagnostics174
Evidence statusVerified

Verified Verified Audi e-tron diagnostic codes

Showing 71–105 of 174 verified records for this model. Each result opens a manufacturer-specific report with the code meaning, affected vehicles, source evidence and the full diagnostic knowledge page where available.

B200FF4Audi DTC B200FF4 is documented as “Internal malfunction” in the suspension control unit J775 (address 0074). · 2019–2023View diagnostic report →B200FF5Audi DTC B200FF5 is identified in verified Audi service communications as an internal malfunction stored in suspension control module J775 (address 0074). For certain vehicles, Audi attributes B200FF5 to a timing issue in the module’s memory access. · 2019–2020View diagnostic report →B200FF9Audi DTC B200FF9 means “internal problem.” Verified Audi/NHTSA communications link it to driver-assistance control modules and, in documented cases, overly sensitive software diagnostics. Applicability is verified for specified 2019–2022 US Audi models, including the e-tron, e-tron GT, and RS e-tron GT. · 2020–2021View diagnostic report →B200FFAFor certain 2019–2022 US Audi models, B200FFA may be stored in the driver assistance systems control module J1121 as an internal malfunction with symptom code 282648 or 282649. Audi’s published service information states that replacing J1121 for the listed DTCs is not effective. · 2019–2022View diagnostic report →B239C11Verified diagnostic record · 2021View diagnostic report →B2F0100Verified diagnostic record · 2022View diagnostic report →C051F00Verified diagnostic record · 2019–2021View diagnostic report →C052000Verified diagnostic record · 2019–2020View diagnostic report →C102029Verified diagnostic record · 2019–2020View diagnostic report →C102229Audi DTC C102229 means “Lateral acceleration 1 implausible signal.” For applicable 2019–2020 US Audi e-tron vehicles, Audi documented that it may be stored in the ABS control module with multiple cluster warnings, including an ESC warning, during a vehicle sleep-mode/wake-up timing condition. · 2019–2020View diagnostic report →C10AC07Verified diagnostic record · 2020–2021View diagnostic report →C110300Verified diagnostic record · 2021–2022View diagnostic report →C1106F0For a 2019 US Audi e-tron, DTC C1106F0 may be stored in the laser scanner control module J1122 (address 00CD) when Adaptive Cruise Assist is unavailable. NHTSA-published Audi communication 10185262 identifies the DTC as “Dynamic calibration limit exceeded” with symptom code 11575304. · 2019View diagnostic report →C119911For a 2021 Audi e-tron in the US, C119911 is documented in an Audi/NHTSA manufacturer communication as a headlight-related fault: “High beam bulb, short circuit to ground.” The communication says headlight operation is not affected and attributes the stored code to overly sensitive diagnostic software. · 2021View diagnostic report →C1260F0Audi DTC C1260F0 means: “compressor control unit for adaptive suspension, no communication.” Verified Audi service information associates it with an air-suspension malfunction warning and directs inspection of relevant wiring and connector contacts. · 2019–2021View diagnostic report →C12AE02Audi DTC C12AE02 is documented in an official Audi/NHTSA service communication concerning the overhead-view camera system. The supplied evidence does not establish a complete fault description beyond the title fragment “Replacing the control m.” · 2019–2022View diagnostic report →C12AF02C12AF02 is listed in an official Audi/NHTSA manufacturer communication concerning the control module for driver assistance systems (J1121). The supplied evidence does not establish the full code description, vehicle symptoms, driving/charging safety, or a specific repair outcome. · 2019–2022View diagnostic report →C12B002Audi DTC C12B002 is listed in an official Audi/NHTSA manufacturer communication concerning the left overhead-view camera. The communication states that replacing the driver-assistance systems control module J1121 is not effective for this DTC scenario. · 2019–2022View diagnostic report →C12B102For Audi C12B102, verified evidence says replacing the driver-assistance control module J1121 is not effective for the listed DTC condition. The supplied bulletin evidence identifies C12B102 in connection with the right overhead-view camera. · 2019–2022View diagnostic report →C12B3F0C12B3F0 is documented by Audi as “front camera for driver assist systems, dynamic calibration limit exceeded” with symptom code 221202. It is associated with the front camera for assistance systems R242 and can appear with adaptive-light or Audi pre sense warnings. · 2019–2021View diagnostic report →C12B3F2For applicable 2019–2020 US Audi A8 and e-tron vehicles, DTC C12B3F2 indicates: “front camera for driver assist systems, wrong vehicle identification number, static.” Audi’s documented technical background is that the software needs recalibration. · 2019–2020View diagnostic report →C12B3FAFor certain 2019–2020 US Audi A8 and e-tron vehicles, DTC C12B3FA is documented as a front camera for driver-assistance systems communication fault with symptom code 221189. Audi technical-service communications describe it as a rare software-related scenario that can cause driver-assistance warnings. · 2019–2020View diagnostic report →C12B3FBVerified diagnostic record · 2020View diagnostic report →C12B3FDAudi DTC C12B3FD with symptom code 221284 is documented as a temporary visibility restriction detected by the front camera for driver-assistance systems. The cited Audi communications state that it is logged when the camera recognizes a restriction for more than 77 seconds. · 2016–2023View diagnostic report →C12BB00C12BB00 is identified by Audi as “Control motor.” Verified evidence links it to a condition in which certain DC chargers can interrupt charger-to-vehicle communication, temporarily suspending charging. · 2020–2021View diagnostic report →C12BFF0C12BFF0 indicates that automatic calibration of an Audi radar sensor was not possible. Verified Audi service information says this can occur when the calculated dynamic angle offset exceeds ±5° during continuous calibration while driving above a defined speed threshold. · 2019–2023View diagnostic report →C12D5FAC12D5FA is an Audi driver-assistance-system DTC: “control unit for driver assist systems, picture processor does not respond,” with symptom code 221281. Audi documents it as an intermittent condition linked to an overly sensitive diagnostic function in applicable bulletins. · 2019–2022View diagnostic report →C12D7F0C12D7F0 is an Audi driver-assistance DTC meaning “Emergency assistant Status feedback for HMI implausible.” Verified evidence identifies an update needed to a parameter setting/coding in the driver assistance systems control module J1121 (address word 00A5). · 2021View diagnostic report →C12EB92For verified applicable Audi vehicles, DTC C12EB92 is addressed by replacing the laser scanner control module J1122 according to the repair manual, then checking its software version. If the software is below version 0205, the Audi bulletin directs a software update; version 0205 requires no further action. · 2019–2020View diagnostic report →C12EBF1C12EBF1 indicates a malfunction reported for the laser used by Adaptive Cruise Assist. For specified U.S. Audi applications, Audi service communications identify a laser-scanner control-module software issue and prescribe a software update. · 2019–2021View diagnostic report →C12EBF3C12EBF3 is an Audi distance-control laser DTC meaning “laser for distance control, range recognition restricted.” It is documented for certain US 2019–2020 Audi A8 and e-tron vehicles. · 2019–2020View diagnostic report →C1399F0Audi DTC C1399F0 indicates that brake application mode is active during a brake-pad/disc break-in process. In the verified Audi material, the DTC is logged in the ABS control module and is automatically deactivated when the required energy amount is reached. · 2022View diagnostic report →Drive faultVerified diagnostic record · 2019–2023View diagnostic report →Electrical system: fault. Safely stop vehicleVerified diagnostic record · 2021–2024View diagnostic report →Emergency call function: malfunction! Function unavailable. Please contact serviceThis Audi alert indicates that the emergency call function is unavailable and asks the driver to contact service. Verified manufacturer communications document the same instrument-cluster warning and refer to diagnostic trouble codes stored in the Emergency Call Module and Communication Unit. · 2021–2024View diagnostic report →

About this model coverage

EV Diagnostics separates vehicle catalog data from diagnostic applicability. A code is listed as verified for Audi e-tron only when supporting evidence connects that diagnostic identity to the model or its documented model-year range.

Related navigation

All Audi EV models and diagnostics · Search all diagnostic codes · How verification works