Genesis P0741
19-AT-008G Page 12 of 12 31. Input the 8-digit code recorded in Step 10 in the blank spaces in the GDS. Select OK. Input the 8 digit code again and select OK. The GDS will confirm
Quick answer
P0741 is listed in official Genesis automatic-transaxle solenoid DTC service-bulletin material. The supplied evidence does not establish a plain-language fault definition for P0741, nor does it establish EV-specific behavior.
This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.
Watch Videos
Relevant videos play here without leaving this diagnostic page.
No sufficiently relevant embeddable video has been accepted for this diagnostic yet.
Videos are supporting material and never override OEM or regulator evidence.
1. What does P0741 mean?
P0741 is listed in official Genesis automatic-transaxle solenoid DTC service-bulletin material. The supplied evidence does not establish a plain-language fault definition for P0741, nor does it establish EV-specific behavior.
2. Technical explanation
Official NHTSA-hosted Genesis manufacturer communications 23-AT-001G and 19-AT-008G list P0741 among automatic-transaxle solenoid DTCs. The excerpts describe use of GDS service software, including Automatic Transaxle and Oil Pressure Characteristics Input after certain solenoid replacements, followed by a drive confirmation. The supplied excerpts do not identify which component or condition specifically sets P0741.
3. What system is affected?
Automatic transaxle / transmission service information. This is not established as an EV high-voltage, battery, charging, or electric-drive-system code by the verified evidence.
4. How serious is this code?
Not yet established by verified evidence.
5. Symptoms you may notice
Not yet established by verified evidence.
6. Possible causes
- Not yet established by verified evidence.
7. Can I still drive the vehicle?
Not yet established by verified evidence. The cited bulletins instruct a drive confirmation after the specified service procedure, but do not establish that every vehicle with P0741 is safe to drive.
8. Can I charge the vehicle?
Not yet established by verified evidence. No charging information is provided in the verified sources.
9. What you can safely do
- Record the code and any accompanying codes.
- Arrange diagnosis by a Genesis-qualified service facility.
- Do not attempt transmission solenoid replacement or GDS programming unless performed by appropriately trained service personnel.
10. Step-by-step troubleshooting
- Use manufacturer diagnostic procedures and GDS as applicable.
- Review whether the vehicle and repair situation match the applicable Genesis bulletin.
- After qualifying solenoid service, the cited bulletins describe completing Automatic Transaxle and Oil Pressure Characteristics Input in GDS and confirming operation with a drive. The supplied evidence does not provide the complete diagnostic decision process for P0741.
11. When to contact service
Contact a Genesis dealer or qualified transmission service facility for diagnosis. Service need is not explicitly established in the diagnostic record, but the verified documents are manufacturer service-bulletin material.
12. What the service center may check
- Check stored DTCs and accompanying diagnostic information with approved Genesis diagnostic equipment.
- Determine whether an automatic-transaxle solenoid replacement has occurred and whether the cited GDS oil-pressure-characteristics input procedure applies.
- Confirm operation by driving the vehicle after the applicable procedure, as described in the cited bulletins.
13. Possible repair or resolution
- Not yet established by verified evidence. The cited material documents a GDS Automatic Transaxle and Oil Pressure Characteristics Input procedure for specified solenoid replacements; it does not establish that this procedure alone resolves P0741.
14. Affected vehicles
- Genesis G80 · 2023 · US
- Genesis G80 · 2023–2024 · US
15. Related TSBs / service bulletins
- Genesis TSB 23-AT-001G, published March 20, 2023 and hosted by NHTSA as MC-10233543. It lists P0741 among ATM solenoid DTCs and describes GDS oil-pressure-characteristics input for specified solenoids after replacement.
- Genesis TSB 19-AT-008G, published April 8, 2019 and hosted by NHTSA as MC-10253024. It lists P0741 among ATM solenoid DTCs and describes the related GDS procedure.
16. Recall information
- Not yet established by verified evidence.
17. Official manufacturer information
Applicable verified record: Genesis G80, model years 2023-2024, US. The supplied applicability data also contains a duplicate 2023 US entry. Source documents: NHTSA-hosted Genesis manufacturer communications 23-AT-001G and 19-AT-008G.
19. Frequently asked questions
What does P0741 mean on a Genesis?
The supplied verified evidence lists P0741 as an automatic-transaxle solenoid DTC in Genesis service-bulletin material. A specific plain-language definition is not yet established by the provided evidence.
Is P0741 a charging or high-voltage EV code?
Not established by verified evidence. The supplied sources concern automatic-transaxle service procedures, not charging or high-voltage systems.
Does a bulletin provide a confirmed repair for P0741?
No confirmed universal repair is established by the excerpts. They describe a GDS procedure required after replacement of certain listed solenoids, but do not state that it alone repairs every P0741 condition.