EV manufacturer

Genesis EV diagnostics

Explore Genesis diagnostic codes for G80, GV60 and other verified model families. Review source-backed evidence and supported model applicability.

3 model families with verified coverage36 verified
Genesis Electrified G80 — representative Genesis EV/PHEV for diagnostic code coverageGenesis Electrified G80

Models with verified diagnostic coverage

Verified Manufacturer-level verified records

These records passed the verified evidence gate. Model applicability is shown only where separately supported.

C137496Genesis C137496: 076G the procedure to update the Advanced Driver Assistance System Parking (ADAS PRK) control module software to address this conditionP076800For applicable 2023–2024 Genesis G80 vehicles in the US, P076800 is referenced in Genesis bulletin 19-AT-008G as a solenoid-related automatic-transaxle DTC. The bulletin specifies an Oil Pressure Characteristics Input procedure after replacement of certain solenoids, including P076800.P0758For a 2023–2024 Genesis G80 in the U.S., DTC P0758 is listed in Genesis TSB 19-AT-008G among automatic-transaxle solenoid DTCs. The supplied evidence does not establish the plain-language fault definition, driving safety, charging safety, or a confirmed repair for P0758 alone.P075AP075A is listed in Genesis TSB 19-AT-008G among solenoid-related transmission DTCs. The supplied evidence does not establish a plain-language definition of P075A.P075300For Genesis G80 model years 2023–2024 in the US, P075300 is referenced in NHTSA manufacturer communication 19-AT-008G as one of the solenoid codes for which an Automatic Transaxle “Oil Pressure Characteristics Input (Solenoid valve Replacement)” procedure is necessary.P076300Verified diagnostic recordP0743For the supplied Genesis G80 applicability, P0743 is listed in official Genesis automatic-transaxle solenoid-DTC service communications. The supplied evidence does not establish a plain-language fault definition for P0743, its severity, or whether the vehicle is safe to drive or charge.P076A00P076A00 is listed in Genesis service communication 19-AT-008G for certain 2023–2024 US G80 vehicles. The supplied evidence associates it with automatic-transaxle solenoid/oil-pressure diagnostic procedures.P0753P0753 is listed in official Genesis automatic-transaxle solenoid DTC service communications. The supplied evidence does not establish a plain-language fault definition, severity, driving safety, charging safety, or a specific repair for every vehicle.P0748Verified diagnostic recordP099500P099500 is documented by Genesis/NHTSA material as an automatic-transaxle-related DTC. For applicable 2023–2024 Genesis G80 vehicles in the US, the cited bulletin directs technicians to the G80 or G90 Shop Manual for related-DTC diagnosis, including wiring inspection and ETM procedures.P075800Verified diagnostic recordP075DFor a 2023–2024 Genesis G80 in the US, P075D is listed in Genesis TSB 19-AT-008G among transmission solenoid DTCs. The supplied evidence does not establish a code definition, specific symptoms, driving safety, charging safety, or a vehicle-specific repair outcome.P07B500P07B500 is documented by Genesis/NHTSA material as an automatic-transaxle solenoid-related DTC. For applicable 2023–2024 Genesis G80 vehicles in the US, the cited bulletin directs technicians to the G80 or G90 Shop Manual for wiring inspection and ETM-based diagnosis.P0763For the supplied Genesis G80 applicability (US, 2023–2024), P0763 is listed in an official Genesis transmission-solenoid service bulletin. The verified source does not establish a plain-language fault definition for P0763.P0741P0741 is listed in official Genesis automatic-transaxle solenoid DTC service-bulletin material. The supplied evidence does not establish a plain-language fault definition for P0741, nor does it establish EV-specific behavior.P077300For a 2023–2024 Genesis G80 in the US, verified evidence links DTC P077300 to Genesis TSB 19-AT-008G. The bulletin identifies P077300 as a solenoid-related automatic-transaxle DTC and specifies a GDS “Oil Pressure Characteristics Input (Solenoid valve Replacement)” procedure for this code.P076F00P076F00 is identified in the verified Genesis/NHTSA bulletin as “Gear 7 incorrect ratio.” The supplied applicability data associates it with US-market 2023–2024 Genesis G80 vehicles.P0730Verified diagnostic recordP073500P073500 is listed in a Genesis/NHTSA manufacturer communication as “Gear 5 incorrect ratio.” The communication describes this as transaxle clutch slipping more than 200 rpm while in gear.P073600P073600 is identified in the supplied official Genesis/NHTSA bulletin as “Reverse incorrect ratio.” The bulletin describes this as transaxle clutch slipping more than 200 rpm while in gear. The supplied applicability record identifies 2023–2024 Genesis G80 vehicles in the US.P076FP076F is identified in Genesis bulletin 19-AT-012G as “Gear 7 incorrect ratio,” described as transaxle clutch slipping more than 200 rpm while in gear.P0736P0736 is identified in the verified Genesis service bulletin as “Reverse incorrect ratio.” The bulletin describes it as a transaxle condition involving clutch slip of more than 200 rpm while in gear.P0729For the supplied Genesis G80 applicability, P0729 is identified in the verified manufacturer communication as “Gear 6 incorrect ratio.” The communication describes this group of incorrect-ratio DTCs as transaxle clutch slipping more than 200 rpm while in gear.P073000P073000 is identified in the cited Genesis bulletin as “Gear 8 incorrect ratio.” Verified applicability data identifies 2023–2024 Genesis G80 vehicles in the US. The supplied evidence does not establish driving, charging, or repair guidance.P0734P0734 is identified in the supplied NHTSA-posted Genesis TSB as “Gear 4 incorrect ratio.” The TSB describes this group of incorrect-ratio DTCs as transaxle clutch slipping more than 200 rpm while in gear.P073300P073300 is identified in the verified Genesis/NHTSA bulletin as “Gear 3 incorrect ratio.” The bulletin describes this incorrect-ratio group as transaxle clutch slipping more than 200 rpm while in gear.P072900P072900 is identified in the supplied Genesis technical-service-bulletin evidence as “Gear 6 incorrect ratio.” The bulletin describes this as transaxle clutch slipping more than 200 rpm while in gear.P0733P0733 is identified in an official Genesis transaxle service bulletin as “Gear 3 incorrect ratio.” The bulletin describes the condition as transaxle clutch slip of more than 200 rpm while in gear.P0735Verified diagnostic recordP073400P073400 is identified in the supplied Genesis/NHTSA bulletin as “Gear 4 incorrect ratio.” The bulletin describes this group of incorrect-ratio DTCs as transaxle clutch slipping more than 200 rpm while in gear.DC/DC Converter Input Voltage Sensor FaultVerified diagnostic recordCheck Limited Slip DifferentialFor applicable U.S. 2023–2024 Genesis GV60 and GV70 vehicles, “Check Limited Slip Differential” is an E-LSD warning message. Genesis TSB 23-DS-003G directs technicians to check for specific E-LSD diagnostic trouble codes before determining the repair path.P1B77P1B77 is referenced in Genesis service-campaign materials as a diagnostic trouble code that may occur if an ICCU fuse is installed by itself without replacement of the ICCU assembly. The campaign must be performed by a certified EV Genesis Retailer.C1620For applicable 2023 Genesis G80 vehicles in the US, DTC C1620 is covered by Genesis TSB 25-BE-007G, titled “Front Radar Software Update for DTC C1620.”C2721C2721 is a Genesis DTC titled “Front View Came.” Verified evidence links it to the front-view camera system and directs a GDS-based ignition cycle and driving calibration procedure.