Genesis P0743
19-AT-008G Page 12 of 12 31. Input the 8-digit code recorded in Step 10 in the blank spaces in the GDS. Select OK. Input the 8 digit code again and select OK. The GDS will confirm
Quick answer
For the supplied Genesis G80 applicability, P0743 is listed in official Genesis automatic-transaxle solenoid-DTC service communications. The supplied evidence does not establish a plain-language fault definition for P0743, its severity, or whether the vehicle is safe to drive or charge.
This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.
Watch Videos
Relevant videos play here without leaving this diagnostic page.
No sufficiently relevant embeddable video has been accepted for this diagnostic yet.
Videos are supporting material and never override OEM or regulator evidence.
1. What does P0743 mean?
For the supplied Genesis G80 applicability, P0743 is listed in official Genesis automatic-transaxle solenoid-DTC service communications. The supplied evidence does not establish a plain-language fault definition for P0743, its severity, or whether the vehicle is safe to drive or charge.
2. Technical explanation
The verified evidence identifies P0743 as one of the automatic-transaxle solenoid DTCs covered by Genesis service communications 23-AT-001G and 19-AT-008G. The communications describe GDS-guided software-management and automatic-transaxle oil-pressure-characteristics input procedures, including recording and re-entering an 8-digit code and confirming proper operation with a drive. The evidence does not establish that every P0743 case requires a particular repair or procedure.
3. What system is affected?
Automatic transaxle / solenoid-DTC service procedure.
4. How serious is this code?
Not yet established by verified evidence.
5. Symptoms you may notice
- Not yet established by verified evidence.
6. Possible causes
- Not yet established by verified evidence.
7. Can I still drive the vehicle?
Not yet established by verified evidence. The cited service communications include a post-procedure drive to confirm operation, but do not provide general driving-safety guidance for a vehicle with P0743.
8. Can I charge the vehicle?
Not yet established by verified evidence.
9. What you can safely do
- Arrange diagnosis by a Genesis dealer or qualified service facility.
- Provide the stored DTC P0743 and the vehicle VIN to the service facility.
- Do not attempt transaxle software-management or solenoid-related procedures without appropriate manufacturer diagnostic equipment and training.
10. Step-by-step troubleshooting
- Confirm P0743 with manufacturer-capable diagnostic equipment.
- Check whether Genesis TSB 23-AT-001G or 19-AT-008G applies to the specific vehicle by VIN, model year, and service history.
- If a covered procedure is performed, follow the manufacturer GDS prompts, including the required 8-digit-code confirmation and operation confirmation described in the bulletin.
11. When to contact service
Contact a Genesis dealer or qualified transmission service facility for VIN-specific diagnosis and bulletin applicability. The supplied evidence does not establish urgency or drivability restrictions.
12. What the service center may check
- Retrieve and document DTC P0743 using GDS or equivalent manufacturer-capable equipment.
- Determine applicability of the cited Genesis automatic-transaxle solenoid-DTC service communication.
- Where applicable, follow the bulletin's GDS-guided software-management and automatic-transaxle oil-pressure-characteristics input process.
- Confirm proper operation through the post-procedure drive referenced by the bulletin.
13. Possible repair or resolution
- Not yet established by verified evidence. The supplied bulletins document a GDS-guided service process for covered automatic-transaxle solenoid DTCs, but do not establish a universal repair for P0743.
14. Affected vehicles
- Genesis G80 · 2023 · US
- Genesis G80 · 2023–2024 · US
15. Related TSBs / service bulletins
- Genesis TSB 23-AT-001G, published March 20, 2023: Covers automatic-transaxle solenoid DTCs including P0743 and describes GDS-guided software management and automatic-transaxle oil-pressure-characteristics input procedures. Source: NHTSA manufacturer communication MC-10233543-0001.
- Genesis TSB 19-AT-008G, published April 8, 2019: Covers automatic-transaxle solenoid DTCs including P0743 and describes GDS-guided software management and automatic-transaxle oil-pressure-characteristics input procedures. Source: NHTSA manufacturer communication MC-10253024-0001.
16. Recall information
- Not yet established by verified evidence.
17. Official manufacturer information
Official NHTSA-hosted Genesis communications: 23-AT-001G: https://static.nhtsa.gov/odi/tsbs/2023/MC-10233543-0001.pdf ; 19-AT-008G: https://static.nhtsa.gov/odi/tsbs/2019/MC-10253024-0001.pdf
19. Frequently asked questions
What does P0743 mean on the supplied Genesis record?
The supplied verified evidence establishes only that P0743 is included among Genesis automatic-transaxle solenoid DTCs covered by the cited service communications. A plain-language fault meaning is not yet established by verified evidence.
Which vehicles are identified in the supplied applicability data?
Genesis G80, U.S. market, model years 2023 through 2024. The supplied data also contains a duplicate 2023 applicability entry.
Is there an official service bulletin for P0743?
Yes. The supplied evidence includes Genesis TSBs 23-AT-001G and 19-AT-008G, both listing P0743 among covered automatic-transaxle solenoid DTCs.
Can I keep driving with P0743?
Not yet established by verified evidence. Obtain VIN-specific diagnosis from Genesis or a qualified service facility.