Genesis P0758
19-AT-008G Page 12 of 12 31. Input the 8-digit code recorded in Step 10 in the blank spaces in the GDS. Select OK. Input the 8 digit code again and select OK. The GDS will confirm
Quick answer
For a 2023–2024 Genesis G80 in the U.S., DTC P0758 is listed in Genesis TSB 19-AT-008G among automatic-transaxle solenoid DTCs. The supplied evidence does not establish the plain-language fault definition, driving safety, charging safety, or a confirmed repair for P0758 alone.
This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.
Watch Videos
Relevant videos play here without leaving this diagnostic page.
No sufficiently relevant embeddable video has been accepted for this diagnostic yet.
Videos are supporting material and never override OEM or regulator evidence.
1. What does P0758 mean?
For a 2023–2024 Genesis G80 in the U.S., DTC P0758 is listed in Genesis TSB 19-AT-008G among automatic-transaxle solenoid DTCs. The supplied evidence does not establish the plain-language fault definition, driving safety, charging safety, or a confirmed repair for P0758 alone.
2. Technical explanation
Verified evidence identifies P0758 as one of the solenoid-related DTCs referenced by Genesis TSB 19-AT-008G. The bulletin describes a GDS procedure involving entry of an 8-digit code, confirmation that the procedure was completed, and a drive to confirm proper operation. The supplied excerpt also references selection of a solenoid type and an automatic-transaxle/oil-pressure characteristics input procedure. It does not establish which specific solenoid or fault condition corresponds to P0758.
3. What system is affected?
Automatic transaxle / solenoid-related diagnostic procedure, based on the TSB evidence.
4. How serious is this code?
Unknown. Not yet established by verified evidence.
5. Symptoms you may notice
Not yet established by verified evidence.
6. Possible causes
- Not yet established by verified evidence.
7. Can I still drive the vehicle?
Unknown. The bulletin instructs a drive to confirm proper operation after its procedure, but the supplied evidence does not establish whether the vehicle is safe to drive while P0758 is active.
8. Can I charge the vehicle?
Unknown. Charging applicability or safety is not established by the supplied evidence.
9. What you can safely do
- Have the diagnostic code evaluated using the applicable Genesis diagnostic process.
- Use the GDS procedure described in Genesis TSB 19-AT-008G only through qualified service personnel.
- Do not perform high-voltage or transmission repair work based solely on this code.
10. Step-by-step troubleshooting
- Verify that the vehicle is a 2023–2024 Genesis G80 for the U.S. market.
- Check whether P0758 is present as an active or stored DTC using GDS or equivalent approved diagnostic equipment.
- Refer to Genesis TSB 19-AT-008G for the applicable solenoid-related procedure.
- The supplied evidence references recording and entering an 8-digit code in GDS twice, then confirming completion of the procedure.
- After the applicable procedure, the bulletin directs a drive to confirm proper operation.
11. When to contact service
Contact an authorized Genesis service center. The supplied official bulletin describes a GDS-based automatic-transaxle solenoid procedure and post-procedure confirmation drive.
12. What the service center may check
- Confirm vehicle applicability: Genesis G80, model years 2023–2024, U.S. region.
- Confirm P0758 with approved diagnostic equipment.
- Review Genesis TSB 19-AT-008G.
- Perform the applicable GDS procedure referenced in the bulletin, including its 8-digit code confirmation process.
- Drive the vehicle after the procedure to confirm proper operation, as directed by the bulletin.
13. Possible repair or resolution
- Not yet established by verified evidence. The supplied TSB excerpt documents a GDS procedure and confirmation drive, but does not provide enough verified information to state a specific component replacement or repair outcome for P0758.
14. Affected vehicles
- Genesis G80 · 2023–2024 · US
15. Related TSBs / service bulletins
- Genesis TSB 19-AT-008G, published through NHTSA as Manufacturer Communication PDF 10253024 on 2019-04-08. It lists P0758 among solenoid DTCs and describes a GDS procedure with 8-digit code entry and post-procedure driving confirmation.
16. Recall information
- Not yet established by verified evidence.
17. Official manufacturer information
Official source: NHTSA Manufacturer Communication PDF 10253024, Genesis TSB 19-AT-008G: https://static.nhtsa.gov/odi/tsbs/2019/MC-10253024-0001.pdf
19. Frequently asked questions
What does P0758 mean on a Genesis G80?
The supplied verified evidence does not establish a plain-language definition. It establishes that P0758 is included in Genesis TSB 19-AT-008G as a solenoid-related automatic-transaxle DTC.
Does TSB 19-AT-008G apply to my Genesis G80?
The supplied applicability evidence identifies U.S.-market 2023–2024 Genesis G80 vehicles. Applicability beyond those vehicles is not established by the supplied evidence.
Can I drive with P0758?
Not yet established by verified evidence. The bulletin calls for a drive to confirm proper operation after its procedure, but does not state whether driving is safe with an active P0758.
Is P0758 related to EV charging?
Not yet established by verified evidence. The supplied source concerns the automatic transaxle and does not address charging.